- 您現在的位置：買賣IC網 > PDF目錄372193 > SP708TEU +3.0V/+3.3V Low Power Microprocessor Supervisory Circuits PDF資料下載
參數資料
| 型號： | SP708TEU |
| 英文描述： | +3.0V/+3.3V Low Power Microprocessor Supervisory Circuits |
| 中文描述： | 3.0V / 3.3V低功耗微處理器監控電路 |
| 文件頁數： | 10/18頁 |
| 文件大小： | 213K |
| 代理商： | SP708TEU |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁當前第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁
10
Rev. 10-17-00 SP706 +3.0/ +3.3 Low Power Microprocessor Circuits Copyright 2000 Sipex Corporation
the reset threshold, an internal timer releases
RESET after 200ms. RESET pulses LOW when-
ever V
dips below the reset threshold, such as
in a brownout condition. When a brownout
condition occurs in the middle of a previously
initiated reset pulse, the pulse continues for at
least another 140ms. During power-down, once
V
falls below the reset threshold, RESET
stays LOW and is guaranteed to be 0.4V or less
until V
CC
drops below 1V.
The active-HIGH RESET output is simply
the complement of the RESET output and is
guaranteed to be valid with V
down to 1.1V.
Some
μ
Ps, such as Intel's 80C51, require an
active-HIGH reset pulse.
Watchdog Timer
The SP706P/R/S/T-SP708R/S/T series watchdog
circuit monitors the
μ
P's activity. If the
μ
P does
not toggle the watchdog input (WDI) within 1.6
seconds and WDI is not tri-stated, WDO goes
LOW. As long as RESET is asserted or the WDI
input is tri-stated, the watchdog timer will stay
cleared and will not count. As soon as RESET
is released and WDI is driven HIGH or LOW,
the timer will start counting. Pulses as short as
50ns can be detected.
Typically, WDO will be connected to the
non-maskable interrupt input (NMI) of a
μ
P.
When V
drops below the reset threshold, WDO
will go LOW independent of the current status
of the watchdog timer. Normally this would
trigger an NMI but RESET goes LOW simulta-
neously, and thus overrides the NMI.
If WDI is left unconnected, WDO can be used as
a low-line output. Since floating WDI disables
the internal timer, WDO goes LOW only when
V
falls below the reset threshold, thus
functioning as a low-line output.
Power-Fail Comparator
The power-fail comparator can be used for
various purposes because its output and
noninverting input are not internally connected.
The inverting input is internally connected to
a 1.25V reference.
FEATURES
The SP706P/R/S/T-SP708R/S/T series provides
four key functions:
1. A reset output during power-up, power-down
and brownout conditions.
2. An independent watchdog output that goes
LOW if the watchdog input has not been toggled
within 1.6 sec.
3. A 1.25V threshold detector for power-fail
warning, low battery detection, or monitoring a
power supply other than +3.3V/+3.0V.
4. An active-LOW manual-reset that allows
RESET to be triggered by a pushbutton switch.
The SP706R/S/T devices are the same as the
SP708R/S/T devices except for the active-HIGH
RESET substitution of the watchdog timer. The
SP706P device is the same as the SP706R de-
vice except an active-HIGH RESET is provided
rather than an active-LOW RESET.
THEORY OF OPERATION
The SP706P/R/S/T-SP708R/S/T series is a mi-
croprocessor (
μ
P) supervisory circuit that moni-
tors the power supplied to digital circuits such
as microprocessors, microcontrollers, or
memory. The series is an ideal solution for
portable, battery-powered equipment that re-
quires power supply monitoring. Implementing
this series will reduce the number of compo-
nents and overall complexity of a system. The
watchdog functions of this product family will
continuously oversee the operational status of a
system. The operational features and benefits of
the SP706P/R/S/T-SP708R/S/T series are de-
scribed, in more detail, below.
RESET Output
A microprocessor's reset input starts the
μ
P
in a known state. The SP706P/R/S/T-SP708R/
S/T series asserts reset during power-up and
prevents code execution errors during power-
down or brownout conditions.
During power-up, once V
reaches 1V, RESET
is a guaranteed logic LOW of 0.4V or less. As
V
rises, RESET stays LOW. When V
CC
rises above
相關PDF資料 |
PDF描述 |
|---|---|
| SP708TCN | +3.0V/+3.3V Low Power Microprocessor Supervisory Circuits |
| SP708TCP | +3.0V/+3.3V Low Power Microprocessor Supervisory Circuits |
| SP7512BN | Converter IC |
| HS3120B2Q | Converter IC |
| HS3120C2N | Converter IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SP710AS | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| SP7120 | 制造商:SIPEX 制造商全稱:Sipex Corporation 功能描述:Evaluation Board Manual |
| SP7120_07 | 制造商:SIPEX 制造商全稱:Sipex Corporation 功能描述:Evaluation Board Manual |
| SP7120AEB | 功能描述:LED 照明開發工具 Common Cathode Linear LED Driver RoHS:否 制造商:Fairchild Semiconductor 產品:Evaluation Kits 用于:FL7732 核心: 電源電壓:120V 系列: 封裝: |
| SP7120AEK-L | 制造商:Exar Corporation 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。