參數資料
型號： ST16C454IJ68-F
廠商： Exar Corporation
文件頁數： 27/29頁
文件大?。?/td> 0K
描述： IC UART QUAD 68PLCC
標準包裝： 19
特點： *
通道數： 4，QUART
FIFO's： 1 字節
電源電壓： 2.97 V ~ 5.5 V
帶故障啟動位檢測功能： 是
帶調制解調器控制功能： 是
帶CMOS： 是
安裝類型： 表面貼裝
封裝/外殼： 68-LCC（J 形引線）
供應商設備封裝： 68-PLCC
包裝： 管件
其它名稱： 1016-1565-5
ST16C454IJ68-F-ND
ST16C454
7
Rev. 3.31
-CD A-B
9,27
-CD C-D
43,61
I
Carrier Detect (active low) - These inputs are associated with
individual UART channels A through D. A logic 0 on this pin indicates
that a carrier has been detected by the modem for that channel.
-CTS A-B
11,25
-CTS C-D
45,59
I
Clear to Send (active low) - These inputs are associated with
individual UART channels, A through D. A logic 0 on the -CTS pin
indicates the modem or data set is ready to accept transmit data
from the 454. Status can be tested by reading MSR bit-4.
-DSR A-B
10,26
-DSR C-D
44,60
I
Data Set Ready (active low) - These inputs are associated with
individual UART channels, A through D. A logic 0 on this pin
indicates the modem or data set is powered-on and is ready for
data exchange with the UART. This pin has no effect on the
UART’s transmit or receive operation. This pin has no effect on the
UART’s transmit or receive operation.
-DTR A-B
12,24
-DTR C-D
46,58
O
Data Terminal Ready (active low) - These inputs are associated
with individual UART channels, A through D. A logic 0 on this pin
indicates that the 454 is powered-on and ready. This pin can be
controlled via the modem control register. Writing a logic 1 to MCR
bit-0 will set the -DTR output to logic 0, enabling the modem. This
pin will be a logic 1 after writing a logic 0 to MCR bit-0. This pin has
no effect on the UART’s transmit or receive operation.
-RI A-B
8,28
-RI C-D
42,62
I
Ring Indicator (active low) - These inputs are associated with
individual UART channels, A through D. A logic 0 on this pin
indicates the modem has received a ringing signal from the
telephone line. A logic 1 transition on this input pin will generate an
interrupt.
-RTS A-B
14,22
-RTS C-D
48,56
O
Request to Send (active low) - These outputs are associated with
individual UART channels, A through D. A logic 0 on the -RTS pin
indicates the transmitter has data ready and waiting to send.
Writing a logic 1 in the modem control register (MCR bit-1) will set
this pin to a logic 0 indicating data is available. After a reset this pin
will be set to a logic 1. This pin has no effect on the UART’s transmit
Symbol
Pin
Signal
Pin Description
type
SYMBOL DESCRIPTION
相關PDF資料
PDF描述
VE-25D-IY CONVERTER MOD DC/DC 85V 50W
ST16C654CQ64TR-F IC UART FIFO 64B QUAD 64LQFP
XR16V564IV80-F IC UART FIFO 32B QUAD 80LQFP
VE-25B-IY CONVERTER MOD DC/DC 95V 50W
XR16M564IV80-F IC UART FIFO 32B QUAD 80LQFP
相關代理商/技術參數
參數描述
ST16C454IJ68TR-F 功能描述:UART 接口集成電路 QUAD UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
ST16C550 制造商:EXAR 制造商全稱:EXAR 功能描述:UART WITH 16-BYTE FIFO’s
ST16C550_05 制造商:EXAR 制造商全稱:EXAR 功能描述:UART WITH 16-BYTE FIFO’s
ST16C550CJ44 制造商:Exar 功能描述:Bulk
ST16C550CJ44-F 功能描述:UART 接口集成電路 2.97V-5.5V 16B FIFO temp 0C to 70C; UART RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*