參數資料
型號： ST622XC-KIT
英文描述： STARTER KIT DATASHEET FOR ST620X. ST621X AND ST622X
中文描述： 入門套件部件的ST620X。 ST621X及ST622X
文件頁數： 11/84頁
文件大?。?/td> 969K
代理商： ST622XC-KIT
11/84
ST62T28C/E28C
MEMORY MAP
(Cont’d)
1.3.6 Data RAM Bank Register (DRBR)
Address: CBh
—
Write only
Bit 7-5 = These bits are not used
Bit 4
-
DRBR4
. This bit, when set, selects RAM
Page 2.
Bit 3 -
DRBR3
. This bit, when set, selects RAM
Page 1.
Bit 2.0 These bits are not used.
The selection of the bank is made by programming
the Data RAM Bank Switch register (DRBR regis-
ter) located at address CBh of the Data Space ac-
cording to Table 1. No more than one bank should
be set at a time.
The DRBR register can be addressed like a RAM
Data Space location at the address CBh; never-
theless it is a write only register that cannot be ac-
cessed with single-bit operations. This register is
used to select the desired 64-byte RAM bank of
the Data Space. The number of banks has to be
loaded in the DRBR register and the instruction
has to point to the selected location as if it was in
bank 0 (from 00h address to 3Fh address).
This register is not cleared during the MCU initiali-
zation, therefore it must be written before the first
access to the Data Space bank region. Refer to
the Data Space description for additional informa-
tion. The DRBR register is not modified when an
interrupt or a subroutine occurs.
Notes
:
Care is required when handling the DRBR register
as it is write only. For this reason, it is not allowed
to change the DRBR contents while executing in-
terrupt service routine, as the service routine can-
not save and then restore its previous content. If it
is impossible to avoid the writing of this register in
interrupt service routine, an image of this register
must be saved in a RAM location, and each time
the program writes to DRBR it must write also to
the image register. The image register must be
written first, so if an interrupt occurs between the
two instructions the DRBR is not affected.
In DRBR Register, only 1 bit must be set. Other-
wise two or more pages are enabled in parallel,
producing errors.
Table 5. Data RAM Bank Register Set-up
7
0
-
-
-
DRBR4 DRBR3
-
-
-
DRBR
00h
01h
02h
08h
10h
other
ST62T28C/E28C
None
Reserved
Reserved
RAM Page 1
RAM Page 2
Reserved
11
相關PDF資料
PDF描述
ST6246B 8-BIT MICROCONTROLLER ( MCU ) WITH OTP. ROM. FASTROM. EPROM. LCD DRIVER. EEPROM. A/D CONVERTER AND 56 PINS
ST624XB-KIT STARTER KIT DATASHEET FOR ST624X
ST62E40BG1 8-BIT MICROCONTROLLER
ST62T45BQ6 8-BIT MICROCONTROLLER
ST6242B 8-BIT MICROCONTROLLER ( MCU ) WITH OTP. ROM. FASTROM. EPROM. LCD DRIVER. EEPROM. A/D CONVERTER AND 64 PINS
相關代理商/技術參數
參數描述
ST622XC-KIT/110 功能描述:開發板和工具包 - 其他處理器 ST622X Starter Kit RoHS:否 制造商:Freescale Semiconductor 產品:Development Systems 工具用于評估:P3041 核心:e500mc 接口類型:I2C, SPI, USB 工作電源電壓:
ST622XC-KIT/UK 制造商:STMicroelectronics 功能描述:ST620 ST621 RS232 STARTER KIT
ST6230 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:8/16-Bit Micros
ST6230B 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT MICROCONTROLLER ( MCU ) WITH OTP. ROM. FASTROM. A/D CONVERTER. 16-BIT AUTO-RELOAD TIMER. EEPROM. SPI. UART AND 28 PINS
ST6230BB1 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:8-BIT OTP/EPROM MCUs WITH A/D CONVERTER, 16-BIT AUTO-RELOAD TIMER, EEPROM, SPI AND UART
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*