Electrical Specifications
45
SLES115 — August 2004
TAS5518
3
Electrical Specifications
3.1
Absolute Maximum Ratings{
UNITS
Supply voltage, DVDD and DVD_PWM
0.3 V to 3.6 V
Supply voltage, AVDD_PLL
0.3 V to 3.6 V
3.3-V digital input
0.5 V to DVDD + 0.5 V
Input voltage
5 V tolerant
(2) digital input
0.5 V to 6 V
Input voltage
Input clamp current, IIK (VI < 0 or VI > 1.8 V
±20 mA
Output clamp current, IOK (VO < 0 or VO > 1.8 V)
±20 mA
Operating free air temperature
0°C to 70°C
Storage temperature range, Tstg
65°C to 150°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. VREF is a 1.8-V supply derived from regulators internal to the TAS5518 chip. VREF is on terminals VRA_PLL, VRD_PLL, VR_DPLL,
VR_DIG, and VR_PWM. These terminals are provided to permit use of external filter capacitors, but should not be used to source
power to external devices.
2. 5-V tolerant inputs are RESET, PDN, MUTE, HP_SEL, SCLK, LRCLK, MCLK, SDIN1, SDIN2, SDIN3, SDIN4, SDA, and SCL.
3. VRA_PLL, VRD_PLL, VR_DPLL, VR_DIG, VR_PWM
DISSIPATION RATING TABLE (High-k Board, 1055C Junction)
PACKAGE
TA ≤ 255C
POWER RATING
DERATING FACTOR
ABOVE TA = 255C
TA = 705C
POWER RATING
PAG
1869 mW
23.36 mW/°C
818 mW
3.2
Dynamic Performance (At Recommended Operating Conditions at 255C)
PARAMETER
TEST CONDITIONS
MIN
NOM
MAX UNITS
Dynamic range
TAS5518 + TAS5182 EVM A-weighted (FS = 48 kHz)
110
dB
Total harmonic distortion
TAS5182 A at 1 W
0.1%
Total harmonic distortion
TAS5518 ouput
0.01%
Frequency response
32-kHz to 96-kHz sample rates
±0.1
dB
Frequency response
176.4, 192-kHz sample rates
±0.2
dB
3.3
Recommended Operating Conditions (over 05C to 705C)
MIN
NOM
MAX
UNITS
Digital supply voltage, DVDD and DVDD_PWM
3
3.3
3.6
V
Analog supply voltage, AVDD_PLL
3
3.3
3.6
V
3.3 V
2
High-level input voltage, VIH
2
V
High level input voltage, VIH
1.8-V LVCMOS (XTL_IN)
1.26
V
3.3 V
0.8
Low-level input voltage, VIL
0.8
V
Low level input voltage, VIL
1.8-V (XTL_IN)
0.54
V
Operating ambient air temperature range, TA
20
25
70
°C
Operating junction temperature range, TJ
20
105
°C
NOTE 4: 5-V tolerant inputs are SDA, SCL, RESET, PDN, MUTE, HP_SEL, SCLK, LRCLK, MCLK, SDIN1, SDIN2, SDIN3, and SDIN4.