參數資料
型號： TLC32044E
廠商： Texas Instruments, Inc.
英文描述： VOICE-BAND ANALOG INTERFACE CIRCUITS
中文描述： 語音頻帶模擬接口電路
文件頁數： 7/39頁
文件大小： 535K
代理商： TLC32044E
TLC32044C, TLC32044E, TLC32044I, TLC32044M TLC32045C, TLC32045I
VOICE-BAND ANALOG INTERFACE CIRCUITS
SLAS017F – MARCH 1988 – REVISED MAY 1995
7
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
PRINCIPLES OF OPERATION
D/A low-pass filter, D/A low-pass filter clocking, and D/A conversion timing (continued)
The D/A conversion rate is attained by frequency dividing the 288-kHz switched-capacitor filter clock with TX
Counter B. Unwanted aliasing is prevented because the D/A conversion rate is an integral submultiple of the
switched-capacitor low-pass filter sampling rate, and the two rates are synchronously locked.
asynchronous versus synchronous operation
If the transmit section of the AIC (low-pass filter and DAC) and receive section (bandpass filter and ADC) are
operated asynchronously, the low-pass and bandpass filter clocks are independently generated from the master
clock signal. Also, the D/A and A/D conversion rates are independently determined. If the transmit and receive
sections are operated synchronously, the low-pass filter clock drives both low-pass and bandpass filters. In
synchronous operation, the A/D conversion timing is derived from, and is equal to, the D/A conversion timing
(see description of the WORD/BYTE in the Terminal Functions table.)
D/A converter performance specifications
Fundamental performance specifications for the D/A converter circuitry are presented in the D/A converter
operating characteristics section of the data sheet. The D/A converter has a sample-and-hold that is realized
with a switched-capacitor ladder.
system frequency response correction
The (sin x)/x correction for the D/A converter zero-order sample-and-hold output can be provided by an
on-board second-order (sin x)/x correction filter. This (sin x)/x correction filter can be inserted into or deleted
from the signal path by digital signal processor control. When inserted, the (sin x)/x correction filter follows the
switched-capacitor low-pass filter. When the TB register (see Internal Timing Configuration section) equals 36,
the correction results of Figures 11 and 12 can be obtained.
The (sin x)/x correction can also be accomplished by deleting the on-board second-order correction filter and
performing the (sin x)/x correction in digital signal processor software. The system frequency response can be
corrected via DSP software to
±
0.1-dB accuracy to a band edge of 3000 Hz for all sampling rates. This correction
is accomplished with a first-order digital correction filter, which requires only seven TMS320 (SMJ320)
instruction cycles. With a 200-ns instruction cycle, seven instructions represent an overhead factor of only 1.1%
and 1.3% for sampling rates of 8 and 9.6 kHz, respectively (see the (sin x)/x correction section for more details).
serial port
The serial port has four possible modes that are described in detail in the Terminal Functions table. These
modes are briefly described below and in the functional description for WORD/BYTE.
The transmit and receive sections are operated asynchronously, and the serial port interfaces directly
with the DSP.
The transmit and receive sections are operated asynchronously, and the serial port interfaces directly
with the TMS(SMJ)32020, TMS(SMJ)320C25, and the TMS(SMJ)320C30.
The transmit and receive sections are operated synchronously, and the serial port interfaces directly
with the DSP.
The transmit and receive sections are operated synchronously, and the serial port interfaces directly
with the TMS(SMJ)32020, TMS(SMJ)320C25, TMS(SMJ)320C30, or two SN74(54)299 serial-to-
parallel shift registers, which can then interface in parallel to the TMS(SMJ)32010, TMS(SMJ)320C15,
and SMJ320E15 to any other digital signal processor or to external FIFO circuitry.
相關PDF資料
PDF描述
TLC32044I VOICE-BAND ANALOG INTERFACE CIRCUITS
TLC32044M VOICE-BAND ANALOG INTERFACE CIRCUITS
TLC32044MFK VOICE-BAND ANALOG INTERFACE CIRCUITS
TLC32045C VOICE-BAND ANALOG INTERFACE CIRCUITS
TLC32045I VOICE-BAND ANALOG INTERFACE CIRCUITS
相關代理商/技術參數
參數描述
TLC32044EFN 制造商:Rochester Electronics LLC 功能描述:
TLC32044I 制造商:TI 制造商全稱:Texas Instruments 功能描述:VOICE-BAND ANALOG INTERFACE CIRCUITS
TLC32044IFK 制造商:Rochester Electronics LLC 功能描述:
TLC32044IFN 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Linear CODEC
TLC32044IN 制造商:Rochester Electronics LLC 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*