參數資料
型號： TSA5527M
廠商： NXP SEMICONDUCTORS
元件分類： XO, clock
英文描述： 1.3 GHz universal bus-controlled TV synthesizers
中文描述： PLL FREQUENCY SYNTHESIZER, 1300 MHz, PDSO16
封裝： 4.40 MM, PLASTIC, SSOP-16
文件頁數： 23/28頁
文件大?。?/td> 290K
代理商： TSA5527M
1996 Sep 24
23
Philips Semiconductors
Product specification
1.3 GHz universal bus-controlled
TV synthesizers
TSA5526; TSA5527
SOLDERING
Introduction
There is no soldering method that is ideal for all IC
packages. Wave soldering is often preferred when
through-hole and surface mounted components are mixed
on one printed-circuit board. However, wave soldering is
not always suitable for surface mounted ICs, or for
printed-circuits with high population densities. In these
situations reflow soldering is often used.
This text gives a very brief insight to a complex technology.
A more in-depth account of soldering ICs can be found in
our “IC Package Databook”(order code 9398 652 90011).
Reflow soldering
Reflow soldering techniques are suitable for all SO
packages.
Reflow soldering requires solder paste (a suspension of
fine solder particles, flux and binding agent) to be applied
to the printed-circuit board by screen printing, stencilling or
pressure-syringe dispensing before package placement.
Several techniques exist for reflowing; for example,
thermal conduction by heated belt. Dwell times vary
between 50 and 300 seconds depending on heating
method. Typical reflow temperatures range from
215 to 250
°
C.
Preheating is necessary to dry the paste and evaporate
the binding agent. Preheating duration: 45 minutes at
45
°
C.
Wave soldering
Wave soldering techniques can be used for all SO
packages if the following conditions are observed:
A double-wave (a turbulent wave with high upward
pressure followed by a smooth laminar wave) soldering
technique should be used.
The longitudinal axis of the package footprint must be
parallel to the solder flow.
The package footprint must incorporate solder thieves at
the downstream end.
During placement and before soldering, the package must
be fixed with a droplet of adhesive. The adhesive can be
applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the
adhesive is cured.
Maximum permissible solder temperature is 260
°
C, and
maximum duration of package immersion in solder is
10 seconds, if cooled to less than 150
°
C within
6 seconds. Typical dwell time is 4 seconds at 250
°
C.
A mildly-activated flux will eliminate the need for removal
of corrosive residues in most applications.
Repairing soldered joints
Fix the component by first soldering two diagonally-
opposite end leads. Use only a low voltage soldering iron
(less than 24 V) applied to the flat part of the lead. Contact
time must be limited to 10 seconds at up to 300
°
C. When
using a dedicated tool, all other leads can be soldered in
one operation within 2 to 5 seconds between
270 and 320
°
C.
相關PDF資料
PDF描述
TSA5527T 1.3 GHz universal bus-controlled TV synthesizers
TSA5527 1.3 GHz universal bus-controlled TV synthesizer(1.3 GHz通用總線控制的TV合成器)
TSA5526AM 1.3 GHz universal bus-controlled TV synthesizers
TSA5526AT ELECTRICAL POWER CORD
TSA5526M ELECTRICAL POWER CORD
相關代理商/技術參數
參數描述
TSA5527T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:1.3 GHz universal bus-controlled TV synthesizers
TSA5888 制造商:TSC 制造商全稱:Taiwan Semiconductor Company, Ltd 功能描述:Low Vcesat PNP Transistor High allowable power dissipation.
TSA5888CY RMG 功能描述:兩極晶體管 - BJT PNP Transistor RoHS:否 制造商:STMicroelectronics 配置: 晶體管極性:PNP 集電極—基極電壓 VCBO: 集電極—發射極最大電壓 VCEO:- 40 V 發射極 - 基極電壓 VEBO:- 6 V 集電極—射極飽和電壓: 最大直流電集電極電流: 增益帶寬產品fT: 直流集電極/Base Gain hfe Min:100 A 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PowerFLAT 2 x 2
TSA-5A 制造商:OPTIFUSE 功能描述:
TSA6 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EURO TERMINAL BLOCKS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*