參數資料
型號: TUA6036-T
廠商: INFINEON TECHNOLOGIES AG
元件分類: 調諧器
英文描述: 3-BAND, VIDEO TUNER, PDSO38
封裝: TSSOP-38
文件頁數: 44/65頁
文件大?。?/td> 1391K
代理商: TUA6036-T
Specification
49
V 2.51, 2006-01-11
TUA6034, TUA6036
TAIFUN
Reference
10) Limits are related to the tank circuit used in the application board (see Chapter 3 on page 28). Frequency bands
may be adjusted by the choice of external components.
11) The frequency shift is defined as a change in oscillator frequency when the supply voltage varies from
V
CC = 5 to 4.75 V (4.5 V) or from VCC = 5 to 5.25 V (5.5 V). The oscillator is free running during this
measurement.
12) The frequency drift is defined as a change in oscillator frequency if the ambient temperature varies from T
A =
25 to 50 °C or from T
A = 25 to 0 °C. The oscillator is free running during this measurement.
13) The switch-on drift is defined as a change in oscillator frequency between 5 s and 15 min. after switch-on. The
oscillator is free running during this measurement.
16) The supply ripple susceptibility is measured in the application board (see Chapter 3 on page 28), using a
spectrum analyzer connected to the IF output. An unmodulated RF signal is applied to the test board RF input.
A sinewave signal with a frequency of 500 kHz is superposed onto the supply voltage (see 4.5.8 on page 62).
The amplitude of this ripple is adjusted to bring the 500 kHz sidebands around the IF carrier to a level of 53.5
dBc referred to the carrier.
17) This is the level of divider interferences close to the IF frequency. For example channel S3: f
OSC = 158.15 MHz,
1/4 f
OSC = 39.5375 MHz. Divider interference is measured with the application board (see Chapter 3 on page
28). All ground pins are connected to a single ground plane under the IC. The LOWIN input must be left open
(i.e. not connected to any load or cable). The MIDIN and HIGHIN inputs are connected to a hybrid. The
measured level of divider interference are influenced by layout, grounding and port decoupling. The
measurement results between various applications and the reference board could vary as much as 10 dB.
18) Crystal oscillator interference means the 4 MHz sidebands caused by the crystal oscillator. The rejection has
to be greater than 60 dB for an IF output of 100 dBV.
19) The reference frequency rejection is the level of reference frequency sidebands (e.g. 62.5 kHz) related to the
carrier. The rejection has to be greater than 60 dB for an IF output of 100 dBV.
相關PDF資料
PDF描述
TUA6039F-2 3-BAND, VIDEO TUNER, QCC48
TUA6037F 3-BAND, VIDEO TUNER, QCC48
TUA6039 3-BAND, VIDEO TUNER, QCC48
TUA6039-2 3-BAND, VIDEO TUNER, QCC48
TUA6037 3-BAND, VIDEO TUNER, QCC48
相關代理商/技術參數
參數描述
TUA6036TXT 制造商:Infineon Technologies AG 功能描述:Tuners PAL/NTSC 863.25MHz 38-Pin TSSOP
TUA6037 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:3 Band Digital / Hybrid Tuner IC with integrated IF AGC amplifier
TUA6037F 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:3 Band Digital / Hybrid Tuner IC with integrated IF AGC amplifier
TUA6037FXT 制造商:Infineon Technologies AG 功能描述:Tuners PAL/NTSC 863.25MHz 48-Pin VQFN EP
TUA6039 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:3 Band Digital / Hybrid Tuner IC with integrated IF AGC amplifier