- 您現在的位置：買賣IC網 > PDF目錄385952 > XB1009-BD-EV1 (Mimix Broadband, Inc.) 14.0-30.0 GHz GaAs MMIC Buffer Amplifier PDF資料下載
參數資料
| 型號： | XB1009-BD-EV1 |
| 廠商： | Mimix Broadband, Inc. |
| 英文描述： | 14.0-30.0 GHz GaAs MMIC Buffer Amplifier |
| 中文描述： | 14.0-30.0 GHz的砷化鎵單片緩沖放大器 |
| 文件頁數： | 5/7頁 |
| 文件大?。?/td> | 283K |
| 代理商： | XB1009-BD-EV1 |
Page 5 of 7
App Note [1] Biasing -
It is recommended to separately bias each amplifier stage Vd1 through Vd2 at Vd(1,2)=5.0V with Id1=80 mA and
Id2=240 mA. Separate biasing is recommended if the amplifier is to be used at high levels of saturation, where gate rectification will alter the
effective gate control voltage. For non-critical applications it is possible to parallel all stages and adjust the common gate voltage for a total drain
current Id(total)=320 mA. It is also recommended to use active biasing to keep the currents constant as the RF power and temperature vary; this
gives the most reproducible results. Depending on the supply voltage available and the power dissipation constraints, the bias circuit may be a
single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current. The gate of
the pHEMT is controlled to maintain correct drain current and thus drain voltage. The typical gate voltage needed to do this is -0.6V. Typically the
gate is protected with Silicon diodes to limit the applied voltage. Also, make sure to sequence the applied voltage to ensure negative gate bias is
available before applying the positive drain supply.
App Note [2] Bias Arrange
m
ent -
For Parallel Stage Bias (Recommended for general applications) -- The same as Individual Stage Bias but all the drain or gate pad DC bypass
capacitors (~100-200 pF) can be combined. Additional DC bypass capacitance (~0.01 uF) is also recommended to all DC or combination (if gate or
drains are tied together) of DC bias pads.
For Individual Stage Bias (Recommended for saturated applications) -- Each DC pad (Vd1,2 and Vg1,2) needs to have DC bypass capacitance
(~100-200 pF) as close to the device as possible. Additional DC bypass capacitance (~0.01 uF) is also recommended.
14.0-30.0 GHz GaAs MMIC
Buffer Amplifier
B1009-BD
MTTF Graphs
These numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricating foundry.
XB1009-BD Vd1,2=5.0 V Id1,2=320 mA
1.0E+04
1.0E+05
1.0E+06
1.0E+07
1.0E+08
1.0E+09
1.0E+10
55
65
75
85
95
105
115
125
Backplate Temperature (deg C)
M
No RF
Pout=+21 dBm
XB1009-BD Vd1,2=5.0 V Id1,2=320 mA
1.0E+00
1.0E+01
1.0E+02
1.0E+03
1.0E+04
1.0E+05
55
65
75
85
95
105
115
125
Backplate Temperature (deg C)
F
No RF
Pout=+21 dBm
XB1009-BD Vd1,2=5.0 V Id1,2=320 mA
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
55
65
75
85
95
105
115
125
Backplate Temperature (deg C)
R
No RF
Pout=+21 dBm
XB1009-BD Vd1,2=5.0 V Id1,2=320 mA
130
150
170
190
210
230
250
55
65
75
85
95
105
115
125
Backplate Temperature (deg C)
T
No RF
Pout=+21 dBm
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice.
2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
February 2007 - Rev 05-Feb-07
相關PDF資料 |
PDF描述 |
|---|---|
| XB1009-QT | 12.0-27.0 GHz GaAs MMIC Buffer Amplifier, QFN |
| XB1009-QT-0G00 | 12.0-27.0 GHz GaAs MMIC Buffer Amplifier, QFN |
| XB1009-QT-EV1 | 12.0-27.0 GHz GaAs MMIC Buffer Amplifier, QFN |
| XD1001 | 18.0-50.0 GHz GaAs MMIC Distributed Amplifier |
| XD1002 | 0.05-50.0 GHz GaAs MMIC Distributed Amplifier |
相關代理商/技術參數 |
參數描述 |
|---|---|
| XB1009-QT | 制造商:MIMIX 制造商全稱:MIMIX 功能描述:12.0-27.0 GHz GaAs MMIC Buffer Amplifier, QFN |
| XB1009-QT-0G00 | 制造商:MIMIX 制造商全稱:MIMIX 功能描述:12.0-27.0 GHz GaAs MMIC Buffer Amplifier, QFN |
| XB1009-QT-EV1 | 制造商:MIMIX 制造商全稱:MIMIX 功能描述:12.0-27.0 GHz GaAs MMIC Buffer Amplifier, QFN |
| XB1012-QT | 制造商:MIMIX 制造商全稱:MIMIX 功能描述:0.25-6 GHz High Dynamic Range Driver Amplifier |
| XB1012-QT-0G00 | 制造商:MIMIX 制造商全稱:MIMIX 功能描述:0.25-6 GHz High Dynamic Range Driver Amplifier |
發布緊急采購，3分鐘左右您將得到回復。