REV. 1.3.0 3.3 UART Register Descriptions All register bits default to a value of ’0’ unles" />
參數資料
型號： XR21V1414IM-0B-EB
廠商： Exar Corporation
文件頁數： 13/34頁
文件大小： 0K
描述： EVAL BOARD FOR XR21V1414
產品培訓模塊： UART Product Overview
XR21V141x Full-Speed USB UART Family
標準包裝： 1
主要目的： 接口，USB 2.0 至 UART
嵌入式： 否
已用 IC / 零件： XR21V1414IM
已供物品： 板
其它名稱： 1016-1427
XR21V1414
20
4-CH FULL-SPEED USB UART
REV. 1.3.0
3.3
UART Register Descriptions
All register bits default to a value of ’0’ unless otherwise noted.
3.3.1
UART_ENABLE Register Description (Read/Write)
This register enables the UART TX and RX. For proper functionality, the UART TX and RX must be enabled in
the following order:
FIFO_ENABLE_CHx = 0x1
// Enable TX FIFO
UART_ENABLE = 0x3
// Enable TX and RX of that channel
FIFO_ENABLE_CHx = 0x3
// Enable RX FIFO
UART_ENABLE[0]: Enable UART TX
Logic 0 = UART TX disabled.
Logic 1 = UART TX enabled.
UART_ENABLE[1]: Enable UART RX
Logic 0 = UART RX disabled.
Logic 1 = UART RX enabled.
UART_ENABLE[7:2]: Reserved
These bits are reserved and should remain ’0’.
3.3.2
CLOCK_DIVISOR0, CLOCK_DIVISOR1, CLOCK_DIVISOR2 Register Description (Read/Write)
These registers are used for programming the baud rate. The V1414 uses a 19-bit divisor and 16-bit mask
register. Using the internal 48MHz oscillator, the 19-bit divisor is calculated as follows:
CLOCK_DIVISOR = Trunc ( 48000000 / Baud Rate )
For example, if the the baud rate is 115200bps, then
CLOCK_DIVISOR = Trunc ( 48000000 / 115200 ) = Trunc (416.66667) = 416
CLOCK_DIVISOR0[7:0]: Baud rate clock divisor bits [7:0]
CLOCK_DIVISOR1[7:0]: Baud rate clock divisor bits [15:8]
CLOCK_DIVISOR2[2:0]: Baud rate clock divisor bits [18:16]
CLOCK_DIVISOR2[7:3]: Reserved
These bits are reserved and should remain ’0’.
3.3.3
TX_CLOCK_MASK0, TX_CLOCK_MASK1 Register Description (Read/Write)
A look-up table is used for the value of the 16-bit TX Clock mask registers. The index of the look-up table is
calculated as follows:
index = Trunc ( ( ( 48000000 / Baud Rate ) - CLOCK_DIVISOR ) * 32)
For example, if the baud rate is 115200bps, then the index will be:
index = Trunc ( ( ( 48000000 / 115200 ) - 416 ) * 32) = Trunc (21.3333) = 21
The values for some baud rates to program the TX_CLOCK_MASK registers are listed in Table 8. For baud
rates that are not listed, use the index to select TX_CLOCK_MASK register values from Table 9.
3.3.4
RX_CLOCK_MASK0, RX_CLOCK_MASK1 Register Description (Read/Write)
The values for some baud rates to program the RX_CLOCK_MASK registers are listed in Table 8. For baud
rates that are not listed, use the same index calculated for the TX_CLOCK_MASK register to select
RX_CLOCK_MASK register values from Table 9.
相關PDF資料
PDF描述
ECC13DRTF CONN EDGECARD 26POS DIP .100 SLD
RBM22DRKS CONN EDGECARD 44POS DIP .156 SLD
VI-B1W-EX CONVERTER MOD DC/DC 5.5V 75W
V110B24E150BG CONVERTER MOD DC/DC 24V 150W
ESC13DRES CONN EDGECARD 26POS .100 EYELET
相關代理商/技術參數
參數描述
XR21V1414IM48 制造商:EXAR 制造商全稱:EXAR 功能描述:4-CH FULL-SPEED USB UART
XR21V1414IM48-F 功能描述:USB 接口集成電路 4-Ch 12Mbps 48MHz Internal clock; UART RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
XR21V1414IM48-F 制造商:Exar Corporation 功能描述:IC QUAD UART 12MBPS 3.63V 48-TQFP
XR21V1414IM48TR-F 制造商:Exar Corporation 功能描述:USB-to-UART 4-CH 128Byte FIFO 48-Pin TQFP T/R 制造商:Exar Corporation 功能描述:XR21V1414 Series 12 Mbps 3.63 V Quad Channel USB UART SMT - TQFP-48 制造商:Exar Corporation 功能描述:XR21V1414IM48TR-F 制造商:EXAR 功能描述:USB-to-UART 4-CH 128Byte FIFO 48-Pin TQFP T/R
XR21V1414M48-F 制造商:Exar Corporation 功能描述:UART 4-CH FULL SPEED USB I/F 48TQFP 制造商:Exar Corporation 功能描述:UART, 4-CH FULL SPEED, USB I/F, 48TQFP, No. of Channels:4, Data Rate:12Mbps, Sup
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*