參數資料
型號: XX1001-BD-000V
廠商: MIMIX BROADBAND INC
元件分類: 衰減器
英文描述: 18.0-21.0/36.0-42.0 GHz GaAs MMIC Doubler and Power Amplifier
中文描述: 36000 MHz - 42000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
封裝: DIE-14
文件頁數: 4/6頁
文件大?。?/td> 226K
代理商: XX1001-BD-000V
18.0-21.0/36.0-42.0 GHz GaAs MMIC
Doubler and Power Amplifier
Page 4 of 6
App Note [1] Biasing
-
It is recommended to separately bias each amplifier stage Vd1 through Vd6 at Vd1=2.5V, Vd2=3.0V, Vd(3,4,5,6)=4.5V with
Id1<1mA, Id2=20mA, Id3=40mA, Id4=70mA, Id5=150mA, Id6=270mA. Separate biasing is recommended if the amplifier is to be used at high levels
of saturation, where gate rectification will alter the effective gate control voltage. As shown in the bonding diagram, it is possible to parallel stages
Vd(3,4,5) with Id(3,4,5)=260mA while maintaining satisfactory performance. For non-critical applications it is possible to parallel stages Vd(3,4,5,6)
together and adjust the common gate voltage Vg(3,4,5,6) for total drain current Id(total)=530mA. It is also recommended to use active biasing to
keep the currents constant as the RF power and temperature vary; this gives the most reproducible results. Depending on the supply voltage
available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low value
resistor in series with the drain supply used to sense the current. The gate of the pHEMT is controlled to maintain correct drain current and thus
drain voltage. The typical gate voltage needed to do this is -0.7V. Typically the gate is protected with Silicon diodes to limit the applied voltage. Also,
make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply.
App Note [2] Bias Arrangement
-
For Parallel Stage Bias (Recommended for general applications) -- The same as Individual Stage Bias but all the drain pad DC bypass capacitors
(~100-200 pF) can be combined. Additional DC bypass capacitance (~0.01 uF) is also recommended to all DC or combination (if gate or drains are
tied together) of DC bias pads. Vd(3,4,5,6) or Vg(3,4,5,6) have been tied together but can be left open.
For Individual Stage Bias (Recommended for saturated applications) -- Each DC pad (Vd1,2,3,4,5,6 and Vg1,2,3,4,5,6) needs to have DC bypass
capacitance (~100-200 pF) as close to the device as possible. Additional DC bypass capacitance (~0.01 uF) is also recommended.
MTTF
MTTF is calculated from accelerated life-time data of single devices and assumes an isothermal back-plate.
X1001-BD
XX1001-BD, MTTF (yrs) vs. Backplate Temperature (°C)
1.0E+00
1.0E+01
1.0E+02
1.0E+03
1.0E+04
1.0E+05
55
65
75
85
95
Temperature (°C)
M
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice.
2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
January 2007 - Rev 26-Jan-07
相關PDF資料
PDF描述
XX1001-BD-000W 18.0-21.0/36.0-42.0 GHz GaAs MMIC Doubler and Power Amplifier
XX1001-BD-EV1 18.0-21.0/36.0-42.0 GHz GaAs MMIC Doubler and Power Amplifier
XX1001-QK 18.0-21.0/36.0-42.0 GHz Doubler and Power Amplifier, QFN, 7x7mm
XX1001-QK-0L00 18.0-21.0/36.0-42.0 GHz Doubler and Power Amplifier, QFN, 7x7mm
XX1001-QK-0L0T 18.0-21.0/36.0-42.0 GHz Doubler and Power Amplifier, QFN, 7x7mm
相關代理商/技術參數
參數描述
XX1001-BD-000W 制造商:MIMIX 制造商全稱:MIMIX 功能描述:18.0-21.0/36.0-42.0 GHz GaAs MMIC Doubler and Power Amplifier
XX1001-BD-EV1 制造商:MIMIX 制造商全稱:MIMIX 功能描述:18.0-21.0/36.0-42.0 GHz GaAs MMIC Doubler and Power Amplifier
XX1001-QK 制造商:MIMIX 制造商全稱:MIMIX 功能描述:18.0-21.0/36.0-42.0 GHz Doubler
XX1001-QK_07 制造商:MIMIX 制造商全稱:MIMIX 功能描述:18.0-21.0/36.0-42.0 GHz Doubler and Power Amplifier, QFN, 7x7mm
XX1001-QK_09 制造商:MIMIX 制造商全稱:MIMIX 功能描述:18.0-21.0/36.0-42.0 GHz Doubler