
MOS INTEGRATED CIRCUIT
μ
PD30100
The
μ
PD30100 (V
R
4100) is a high-performance, 64-bit RISC (Reduced Instruction Set Computer) type microproc-
essor employing the RISC architecture developed by MIPS.
The V
R
4100 is compact and consumes little power so that it can be used in battery-driven, high-performance
portable systems. In addition, a multiplier circuit is provided to increase the speed.
Detailed functions are described in the following manual. Make sure to read this manual when you are designing
systems.
V
R
4100 User’s Manual (U10050E)
FEATURES
Employs MIPS 64-bit RISC architecture
High-speed processing
·
5-stage pipelining
·
Multiplier circuit
Instruction set compatible with V
R
4000
series (conforming to MIPS-I/II/III)
·
Sum-of-products operation instructions added
·
Floating-point operation instructions deleted
Low power consumption
Supports three power control modes in addition to normal operation modes
Virtual memory management unit (MMU)
32-bit address/data multiplexed bus facilitating system designing
Supply voltage: 2.2 to 3.6 V
Package: 100-pin plastic TQFP
APPLICATIONS
Battery-driven portable systems
Embedded controller, etc.
ORDERING INFORMATION
Part Number
μ
PD30100GC-40-7EA
Package
100-pin plastic QFP (fine pitch) (14
×
14 mm)
V
R
4100
TM
64-BIT MICROPROCESSOR
'
1994
PRELIMINARY DATA SHEET
Document No. U10428EJ1V0DS00 (1st edition)
Date Published November 1996 P
Printed in Japan
1995
The information in this document is subject to change without notice.
The mark shows major revised points.