參數資料
型號: μPD70P3002
廠商: NEC Corp.
英文描述: 16/32 Single -Chip Microcontroller(16/32 位單片微控制器)
中文描述: 16/32單片機(16/32位單片微控制器)
文件頁數: 54/56頁
文件大?。?/td> 367K
代理商: ΜPD70P3002
μ
PD70P3002
54
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note: Strong electric field, when exposed to a MOS device, can cause destruction
of the gate oxide and ultimately degrade the device operation. Steps must
be taken to stop generation of static electricity as much as possible, and
quickly dissipate it once, when it has occurred. Environmental control must
be adequate. When it is dry, humidifier should be used. It is recommended
to avoid using insulators that easily build static electricity. Semiconductor
devices must be stored and transported in an anti-static container, static
shielding bag or conductive material. All test and measurement tools
including work bench and floor should be grounded. The operator should
be grounded using wrist strap. Semiconductor devices must not be touched
with bare hands. Similar precautions need to be taken for PW boards with
semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note: No connection for CMOS device inputs can be cause of malfunction. If no
connection is provided to the input pins, it is possible that an internal input
level may be generated due to noise, etc., hence causing malfunction. CMOS
device behave differently than Bipolar or NMOS devices. Input levels of
CMOS devices must be fixed high or low by using a pull-up or pull-down
circuitry. Each unused pin should be connected to V
DD
or GND with a
resistor, if it is considered to have a possibility of being an output pin. All
handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note: Power-on does not necessarily define initial status of MOS device. Produc-
tion process of MOS does not define the initial operation status of the device.
Immediately after the power source is turned ON, the devices with reset
function have not yet been initialized. Hence, power-on does not guarantee
out-pin levels, I/O settings or contents of registers. Device is not initialized
until the reset signal is received. Reset operation must be executed imme-
diately after power-on for devices having reset function.
相關PDF資料
PDF描述
μPD72862 IEEE1394 OHCI Host Controller(IEEE1394 主控制器)
μPD753104 4 Bit Single Chip Microcontrollers(4位單片微控制器)
μPD753106 4 Bit Single Chip Microcontrollers(4位單片微控制器)
μPD753108 4 Bit Single Chip Microcontrollers(4位單片微控制器)
μPD753204 4 Bit Single Chip Microcontrollers(4位單片微控制器)
相關代理商/技術參數
參數描述
PD-71 制造商:Mac8 功能描述:1 1A Contact 9mm 2.1mm 2.1mm
PD-710 制造商:Power Acoustik 功能描述:AM/FM/CD/DVD/Mp3 And SD Reader Autosound Head Unit 7 Inch LCD 制造商:POWER ACOUSTIK 功能描述:AUTOSOUND HEAD UNIT 7 INCH LCDAM/FM/CD/DVD/MP3 AND SD READER
PD-710B 制造商:Power Acoustik 功能描述:AM/FM/CD/DVD/Mp3/SD/Bluetooth Autosound Head Unit 7 Inch LCD 制造商:POWER ACOUSTIK 功能描述:AUTOSOUND HEAD UNIT 7 INCH LCDAM/FM/CD/DVD/MP3/SD/BLUETOOTH
PD-712 制造商:Power Acoustik 功能描述:7 Inch Touch Screen Autosound Head Unit 制造商:POWER ACOUSTIK 功能描述:AUTOSOUND HEAD UNIT 7 INCH TOUCH SCREEN
PD-712B 制造商:Power Acoustik 功能描述:7 Inch Touch Screen Autosound Head Unit 制造商:POWER ACOUSTIK 功能描述:AUTOSOUND HEAD UNIT 7 INCH TOUCH SCREEN