573
APPENDIX B DEVELOPMENT TOOLS
B.3.1 Hardware (2/2)
(2) When using in-circuit emulator IE-78001-R-A
IE-78001-R-A
Note 1
In-circuit emulator
The in-circuit emulator serves to debug hardware and software when
developing application systems using a 78K/0 Series product. It corresponds
to integrated debugger (ID78K0). This emulator should be used in combination
with emulation probe, and interface adapter which is required to connect this
emulator to the host machine.
IE-70000-98-IF-B or
IE-70000-98-IF-C
Note 1
Interface adapter
This adapter is required when using the PC-9800 Series computer (except
notebook type) as the IE-78001-R-A host machine.
IE-70000-PC-IF-B or
IE-70000-PC-IF-C
Note 1
Interface adapter
This adapter is required when using the IBM PC/AT and their compatible
machine as the IE-78001-R-A host machine.
IE-78000-R-SV3
Interface adapter
This is an adapter and cable necessary when using EWS as a host
machine for the IE-78000-R-A.
As Ethernet, 10Base-5 is supported. With other mode, commercially
available conversion adapter is necessary.
IE-780308-NS-EM1
Note 1
Emulation board
This board emulates the operations of the peripheral hardware peculiar to
a device. It should be used in combination with an in-circuit emulator and
emulation probe conversion.
IE-78K0-R-EX1
Note 1
Emulation probe
conversion board
This board is required when using the IE-780308-NS-EM1 with the
IE-78001-R-A.
IE-78064-R-EM
Note 2
IE-780308-R-EM
Emulation board
This is a board for emulation of peripheral hardware inherent to this device.
(IE-78064-R-EM is for 3.0 to 6.0 V and IE-780308-R-EM is for 2.0 to 5.0 V.)
Use in combination with a IE-78001-R-A.
NP-EP-78230GC-R
Emulation probe
This probe is used to connect the in-circuit emulator to the target system
and is designed for 80-pin plastic QFP (GC-3B9, GC-8BT types).
EV-9200GC-80
Conversion socket
(Refer to
Figure B-2
)
This conversion socket connects the EP-78230GC-R to the target system
board designed to mount a 80-pin plastic QFP (GC-3B9, GC-8BT types).
NP-EP-78054GK-R
Emulation probe
This probe is used to connect the in-circuit emulator to the target system
and is designed for 80-pin plastic TQFP (GK-BE9 type).
TGK-080SDW
Conversion adapter
(Refer to
Figure B-3
)
This conversion adapter connects the EP-78054GK-R to the target system
board designed to mount a 80-pin plastic TQFP (GK-BE9 type).
Notes
1.
Under development
2.
Maintenance product
Remarks
1.
TGK-080SDW is a product of TOKYO ELETECH CORPORATION.
Inquiries : Daimaru Kougyou Co., Ltd.
Phone
: (03) 3820-7112 Tokyo Electronic Component Division
(06) 244-6672
Osaka Electronic Component Division
2.
EV-9200GC-80 is sold in sets of five units.
3.
TGK-080SDW is sold on a unit basis.