44
Dimensions are in inches and
Dimensions are shown for
Technical Support
www.tycoelectronics.com
millimeters unless otherwise
reference purposes only.
USA: 1-800-522-6752
specified. Values in brackets
Specifications subject to change.
Canada: 1-905-475-6222
are metric equivalents.
Mexico: 01-800-733-8926
MAG-MATE and SIAMEZE Application Tooling (Continued)
Magnet Wire Terminals and Termination Systems
Catalog 82221
Revised 10-02
The Linear Product Terminator-522
was designed for intermediate to
high volume applications. It is also a
very flexible platform since it can
accommodate two secondary
application modules. These can
include, but are not limited to,
special wrap-off post trim, continuity
testing with defective coil
identification, and tab bending.
The LPT-522 features our MPT-5
insertion module as well as a
programmable linear slide and
rotary table system. The flexible
system can process coils that have
cavity configurations in a linear
pattern, axial pattern, or
combination of both.
The LPT-522 machine is of a serial
process design, which allows for a
unique coil holding fixture. This
fixture can be palletized to increase
your efficiency and production
rates. The palletized system allows
the operator to load/unload a pallet
of coils while a second pallet is
processing on this machine,
increasing the machine up time and
decreasing non-productive labor.
LPT-522 Linear Product
Terminator
Product Facts
s
Intermediate to high
volume rates, up to 600
assemblies per hour
s
Flexible platform
accommodates secondary
application modules
s
Version to handle in-line,
radial, and linear/angularly
opposed cavities
s
Programmable linear slide
and rotary table
s
Easy programming through
keypad display
s
Palletized fixture system for
greater efficiency and
production rates
s
Microprocessor controlled
s
Fine insertion depth
adjustment
(.001 increments)
s
Two-reel, two-product
capability with or without
alternating feed
s
Single, dual separate, and
on-the-fly dual common
insertion capability
Specifications
Air — 10 scfm@80 psi minimum
Electrical — 110 VAC, 5 AMP
Footprint — 60"x 52"