Dimensions are in inches and
Dimensions are shown for
Technical Support
www.tycoelectronics.com
millimeters unless otherwise
reference purposes only.
USA: 1-800-522-6752
specified. Values in brackets
Specifications subject to change.
Canada: 1-905-475-6222
are metric equivalents.
Mexico: 01-800-733-8926
66
AMPLIVAR and Cluster Blocks Application Tooling (Continued)
Magnet Wire Terminals and Termination Systems
Catalog 82221
Revised 10-02
Dimensions are in inches and
Dimensions are shown for
Technical Support
www.tycoelectronics.com
millimeters unless otherwise
reference purposes only.
USA: 1-800-522-6752
specified. Values in brackets
Specifications subject to change.
Canada: 1-905-475-6222
are metric equivalents.
Mexico: 01-800-733-8926
Model G Splice Terminating
Machine, P/N 356462-2 &
Applicator
Standard G Splice Applicator
Available for the
AMP-O-LECTRIC Model G
splice terminator only.
Semiautomatic bench
machine crimps reeled
splice product. Uses
Standard G Splice
Applicators to provide
access to both sides of the
splice product. Features a
quiet, reliable motor drive,
microprocessor controls for
ease of setup and operation
and guarding and lighting
designed for operator
convenience. Manual
precision crimp height
adjust is standard and
machine-mounted sensors
are available for crimp
quality monitoring.
Two-piece applicator for
crimping end- or side-feed
reeled splice products.
Provides access to both
sides of splice for increased
ease of use and
productivity. Applicators
use an air feed mechanism.
Specifications
AMP-O-LECTRIC Model “G”
Thru Splice Terminator
Capacity — 5 000 lb [2 224 N]
max. crimp force
Deflection — .003 [0.076] max.
per 1 000 lb [445 N] crimp force
Noise — 76 dB max. at 5 000 lb
[2 224 N] full capacity
Weight — Approx. 240 lb
[109 kg]
Height — 20 [508]
Electrical — 120/220 VAC, 50/60
Hz; Avg. 2.6 A at 120 VAC when
used as a bench-top unit at 2 000
cycles per hour operating rate
Air — 90-110 psi [6.21-7.58 bar],
6 scfm [0.00283 m3/s] (when
required for use with air-feed
applicators)
For more information, order Catalog
889021.
Entry Level Terminator (ELT),
1338600-(x)
Semiautomatic Bench
Terminator for side- and
end-feed reeled terminals
and contacts. The ELT uses
a DC motor with gear box
drive. The result is a small-
footprint design that is fast
and quiet. Cycle time is less
than 0.400 sec. with an
operation sound level of
76dBa. With a crimp force
capacity of 3,000 pounds,
the ELT is available for all
but the highest crimp force
applications. Optional
equipment is also available
to meet your specific
application requirements.
Specifications
Width—16.8 [427]
Depth—20.6 [523]
Height—20 [510] w/o reel support
Weight—approx. 150 lb [68 kg]
Electrical—100-240 VAC, 50/60
Hz, 6 A (Note: Avg <1 A at 120 VAC
when used as a bench-top unit at 2,000
cycles per hour operating rate)
Air—90-100 psi [6.21-6.90 bar],
6 scfm [0.00282 m3/s] when
required for use with air-feed
applicators (Note: Optional Air Feed
Valve Assembly Required)
Wire Range—Up to 14 AWG
[2.5 mm2]
For more information, request
catalog 1308382.