參數資料
型號： 101-0517
廠商： Rabbit Semiconductor
文件頁數： 21/110頁
文件大小： 0K
描述： MODULE RABBITCORE RCM3100
標準包裝： 1
系列： RabbitCore®
模塊/板類型： MPU 核心模塊
適用于相關產品： RCM3100
其它名稱： 316-1021
12
RabbitCore RCM3100
3.2 Sample Programs
Of the many sample programs included with Dynamic C, several are specific to the
RCM3100. Sample programs illustrating the general operation of the RCM3100, and
serial communication are provided in the SAMPLES\RCM3100 folder. Each sample program
has comments that describe the purpose and function of the program. Follow the instruc-
tions at the beginning of the sample program.
CONTROLLED.C
—uses the STDIO window to demonstrate digital outputs by toggling
LEDs DS1 and DS2 on the Prototyping Board on and off.
Parallel Port G bit 6 = LED DS1
Parallel Port G bit 7 = LED DS2
Once you have compiled and run this program, you will be prompted via the Dynamic C
STDIO
window to select LED DS1 or DS2. Use your PC keyboard to make your
selection.
Once you have selected the LED, you will be prompted to select to turn the LED either
ON or OFF. A logic low will light up the LED you selected.
FLASHLED1.c
—demonstrates the use of costatements to flash LEDs DS1 and DS2 on
the Prototyping Board at different rates. Once you have compiled and run this program,
LEDs DS1 and DS2 will flash on/off at different rates.
FLASHLED2.c
—demonstrates the use of cofunctions and costatements to flash LEDs
DS1 and DS2 on the Prototyping Board at different rates. Once you have compiled and
run this program, LEDs DS1 and DS2 will flash on/off at different rates.
TOGGLESWITCH.c
—demonstrates the use of costatements to detect switches using the
press-and-release method of debouncing. LEDs DS1 and DS2 on the Prototyping
Board are turned on and off when you press switches S2 and S3.
IR_DEMO.c
—Demonstrates sending Modbus ASCII packets between two Prototyping
Board assemblies via the IrDA transceivers with the IrDA transceivers facing each other.
Note that this sample program will only work with the RCM30/31/32XX Prototyping
Board.
First, compile and run this program on one Prototyping Board assembly, then remove
the programming cable and press the RESET button on the Prototyping Board so that
the first RabbitCore module is operating in the Run mode. Then connect the program-
ming cable to the second Prototyping Board assembly with the RCM3100 and compile
and run the same sample program. With the programming cable still connected to the
second Prototyping Board assembly, press switch S2 on the second Prototyping Board
to transmit a packet. Once the first Prototyping Board assembly receives a test packet, it
will send back a response packet that will be displayed in the Dynamic C STDIO win-
dow. The test packets and response packets have different codes.
Once you have loaded and executed these sample programs and have an understanding of
how Dynamic C and the RCM3100 modules interact, you can move on and try the other
sample programs, or begin building your own.
相關PDF資料
PDF描述
101-0488 MODULE RABBITCORE RCM2210
AT45DB321B-TC IC FLASH 32MBIT 20MHZ 32TSOP
AT45DB011B-SC IC FLASH 1MBIT 20MHZ 8SOIC
SOMOMAP3530-11-1670EFCR SYSTEM ON MODULE LV OMAP3530
395-030-523-202 CARD EDGE 30POS DL .100X.200 BLK
相關代理商/技術參數
參數描述
101-0518 功能描述:模塊化系統 - SOM RCM3110 RABBITCORE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
101052 制造商:RUKO 功能描述:Bulk 制造商:RUKO 功能描述:STEP DRILL 4-30MMX2MM 制造商:RUKO 功能描述:STEP DRILL, 4-30MMX2MM 制造商:RUKO 功能描述:STEP DRILL, 4-30MMX2MM; Drill Bit Size Metric:4mm; Overall Length:100mm; Drill Bit Type:Step; Drill Point Diameter:4mm; Material:HSS; Range:4mm - 30mm; Shank Dia:9mm; Step:2mm ;RoHS Compliant: NA 制造商:RUKO 功能描述:STEP DRILL, 4-30MMX2MM; Drill Bit Size Metric:4mm; Overall Length:100mm; SVHC:No SVHC (19-Dec-2012); Drill Bit Type:Step; Drill Point Diameter:4mm; Material:HSS; Range:4mm - 30mm; Shank Dia:9mm; Step:2mm ;RoHS Compliant: NA
101-0520 功能描述:模塊化系統 - SOM RCM3200 44.2MHz CPU 512K FLASH RJ45 RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
10-105-2-05 制造商:Concord Electronics Inc 功能描述:
10-105208-02P 制造商:Amphenol Aerospace 功能描述:RECEPT
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*