Sample programs are provided in the Dynamic C Samples
參數資料
型號： 20-101-0492
廠商： Rabbit Semiconductor
文件頁數： 42/110頁
文件大?。?/td> 0K
描述： MODULE OP6800 FULL-FEATURED
標準包裝： 1
系列： SBC
模塊/板類型： 單板計算機模塊
適用于相關產品： OP6800
其它名稱： 20-101-492
20-101-492-ND
User’s Manual
33
4.3 Sample Programs
Sample programs are provided in the Dynamic C Samples folder. The sample program
PONG.C
demonstrates the output to the STDIO window.
The various directories in the Samples folder contain specific sample programs that illus-
trate the use of the corresponding Dynamic C libraries.
The OP6800 folder provides sample programs specific to the OP6800. Each sample pro-
gram has comments that describe the purpose and function of the program. Follow the
instructions at the beginning of the sample program.
To run a sample program, open it with the File menu (if it is not still open), then compile
and run it by pressing F9. The OP6800 must be in Program mode (see Section 3.4) and
must be connected to a PC using the programming cable as described in Section 2.1.
More complete information on Dynamic C is provided in the Dynamic C User’s Manual.
TCP/IP specific functions are described in the Dynamic C TCP/IP User’s Manual. Infor-
mation on using the TCP/IP features and sample programs is provided in Section 5,
4.3.1 Board ID
The following sample program can be found in the SAMPLES\OP6800 subdirectory.
BOARD_ID.C
—Detects the type of single-board computer and displays the information
in the STDIO window. For the OP6800, the STDIO window should show OP6800.
4.3.2 Demonstration Board
The following sample programs are found in the DEMO_BD subdirectory in SAMPLES\OP6800.
BUZZER.C
—Demonstrates the use of the buzzer on the Demonstration Board. Remem-
ber to set the jumper across pins 1–2 of header JP1 on the Demonstration Board (see
Figure C-4) to enable the buzzer on. When you finish with BUZZER.C, it is recom-
mended that you reconnect the jumper across pins 2–3 of header JP1 on the Demonstra-
tion Board to disable the buzzer.
KEYPAD.C
—Flashes the LED above a keypad button when the corresponding keypad
button is pressed. The corresponding LED on the Demonstration Board will also flash
if a keypad button in the top row of the keypad is pressed. A message is also displayed
on the LCD.
SWITCHES.C
—Flashes the LED on the Demonstration Board and the OP6800 when
the corresponding pushbutton switch on the Demonstration Board is pressed. A mes-
sage is also displayed on the LCD.
相關PDF資料
PDF描述
101-0492 INTERFACE OP6800 W/ETHERNET PORT
11FMN-BMTR-A-TB CONN FMN HSNG 11POS SGL REV SMD
11FMN-BMT-A-TF CONN FMN HSNG 11POS SNGL NOR SMD
AT24C01-10SI-2.7 IC EEPROM 1KBIT 400KHZ 8SOIC
AT24C01-10PI-2.7 IC EEPROM 1KBIT 400KHZ 8DIP
相關代理商/技術參數
參數描述
20-101-0494 功能描述:模塊化系統 - SOM RCM2250 RabbitCore Module RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-0495 功能描述:處理器配件 BASEPLATE RoHS:否 制造商:Olimex Ltd. 產品:Cable 用于:
20-101-0497 功能描述:單板計算機 OP6810 RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
201-01050 功能描述:鋁質電解電容器 - 帶引線 1 uF Electrolytic Capacitor RoHS:否 制造商:Kemet 引線類型: 電容:220 uF 容差:20 % 電壓額定值:25 V 工作溫度范圍: 端接類型:Radial 外殼直徑:8 mm 外殼長度:11 mm 引線間隔:5 mm 產品:General Purpose Electrolytic Capacitors 封裝:Bulk
201-0105-01 功能描述:印刷電路板和試驗板 JTAG 20 Pin Connector RoHS:否 制造商:3M Electronic Solutions Division 產品:Jumper & Insulated Wires 描述/功能:Jumper wire, 22 AWG 0.1 inch 長度:0.1 in 寬度:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*