using the
參數資料
型號: 20-101-0526
廠商: Rabbit Semiconductor
文件頁數: 62/142頁
文件大?。?/td> 0K
描述: COMPUTER SNGLBD LP3510 FOX7.4MHZ
標準包裝: 1
系列: SBC
模塊/板類型: 單板計算機模塊
適用于相關產品: LP3510
20
Fox (LP3500)
Table 2 lists the power modes based on clock frequency that can be defined in software
using the powerMode function.
The LP3500 can operate at various power levels, depending on the clock frequency and on
which subsystems on the board are turned off using the devPowerSet function. Table 3
lists the LP3500 subsystems that can be turned off with the devPowerSet function.
NOTE: RxE always remains active when the above systems are turned off to allow the
LP3500 to “l(fā)isten” while it is in the
power-save mode.
The LP3500 processor turns off automatically when VIN is removed, and the processor
will not operate again until VIN is restored. The onboard battery provides backup for the
SRAM and the real-time clock. VIN must be applied to the LP3500 in order to run or set
the processor in any of the numbered modes listed in Table 2.
3.2.1 Setting the Power-Save Mode
The LP3500 can be placed in the power-save mode using one of three different software
calls,
serCommAlert,
timedAlert, or
digInAlert,
depending on whether you wish to use Serial Port E, a simple timeout, or a digital input to
trigger the LP3500 to resume operation in one of the other power modes.
If you call serCommAlert, then any activity on Serial Port E will trigger the LP3500 out
of the low-power mode. If you call timedAlert, then the LP3500 is triggered out of the
power-save mode when the specified time has elapsed. If you call digInAlert, then the
LP3500 is triggered out of the power-save mode when the specified channel is activated.
In addition, digInAlert and serCommAlert have “backup” timeout parameters associ-
ated with them to wake up the LP3500 after a specified period even in the absence of the
digital or serial triggers.
Table 3. LP3500 Subsystems That Can Be Turned Off
LP3500 Section
Description
RS-232
Receivers and transmitters are disabled, RxE remains active.
RS-485
Transmitter is disabled.
A/D Converter
(LP3500 model only)
ADS7870 internal oscillator is turned off.
LCD/Keypad Module
LCD/keypad module is turned off.
All of the Above
All sections are disabled as described above.
相關PDF資料
PDF描述
101-0526 COMPUTER SNGLBD LP3510 FOX7.4MHZ
101-0576 COMPUTER SNGLBD BL2510 256K FLSH
20-101-1055 MODULE RABBITCORE RCM3375
20-101-0434 MODULE RABBITCORE RCM2100
046232103103800 CONN FFC/FPC 3POS 1MM R/A SMD
相關代理商/技術參數
參數描述
20-101-0531 功能描述:網絡模塊 BL2102 RoHS:否 制造商:Digi International 產品:ZigBee to Ethernets 處理器類型: 頻率: 隨機存取存儲器: 閃光: 數據速率: 接口類型:Ethernet, RF 工作電源電壓:5 V 最大工作溫度:+ 40 C 尺寸:70 mm x 95 mm x 32 mm
20-101-0535 功能描述:單板計算機 OP7200 Touchscreen RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0536 功能描述:單板計算機 OP7210# RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0537 功能描述:單板計算機 OP7200 TS 512K/512K RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0538 功能描述:單板計算機 OP7210 w/512K/512K RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm