R" />
參數資料
型號: 20-101-0526
廠商: Rabbit Semiconductor
文件頁數: 80/142頁
文件大小: 0K
描述: COMPUTER SNGLBD LP3510 FOX7.4MHZ
標準包裝: 1
系列: SBC
模塊/板類型: 單板計算機模塊
適用于相關產品: LP3510
36
Fox (LP3500)
A program “runs” in either mode, but can only be downloaded and debugged when the
LP3500 is in the Program Mode.
Refer to the Rabbit 3000 Microprocessor User’s Manual for more information on the pro-
gramming port and the programming cable.
3.9.2 Standalone Operation of the LP3500
The LP3500 must be programmed via the Prototyping Board or via a similar arrangement
on a customer-supplied board. Once the LP3500 has been programmed successfully,
remove the serial programming cable from the programming connector and reset the
LP3500. The LP3500 may be reset by cycling the power off/on or by pressing the RESET
button on the Prototyping Board. The LP3500 module may now be removed from the Pro-
totyping Board for end-use installation.
CAUTION: Disconnect power to the Prototyping Board or other boards when removing
or installing your LP3500 to protect against inadvertent shorts across the pins or dam-
age to the LP3500 if the pins are not plugged in correctly. Do not reapply power until
you have verified that the LP3500 is plugged in correctly.
3.10 Other Hardware
3.10.1 Spectrum Spreader
The Rabbit 3000 features a spectrum spreader, which helps to mitigate EMI problems. By
default, the spectrum spreader is on automatically, but it may also be turned off or set to a
stronger setting. The means for doing so is through a simple global macro as shown below.
NOTE: Refer to the Rabbit 3000 Microprocessor User’s Manual for more information
on the spectrum-spreading setting and the maximum clock speed.
1. Select the “Defines” tab from the Dynamic C Options > Project Options menu.
2. Normal spreading is the default, and usually no entry is needed. If you need to specify
normal spreading, add the line
ENABLE_SPREADER=1
For strong spreading, add the line
ENABLE_SPREADER=2
To disable the spectrum spreader, add the line
ENABLE_SPREADER=0
NOTE: The strong spectrum-spreading setting is not recommended since it may limit
the maximum clock speed or the maximum baud rate. It is unlikely that the strong set-
ting will be used in a real application.
3. Click OK to save the macro. The spectrum spreader will now be set to the state specified
by the macro value whenever you are in the project file where you defined the macro.
相關PDF資料
PDF描述
101-0526 COMPUTER SNGLBD LP3510 FOX7.4MHZ
101-0576 COMPUTER SNGLBD BL2510 256K FLSH
20-101-1055 MODULE RABBITCORE RCM3375
20-101-0434 MODULE RABBITCORE RCM2100
046232103103800 CONN FFC/FPC 3POS 1MM R/A SMD
相關代理商/技術參數
參數描述
20-101-0531 功能描述:網絡模塊 BL2102 RoHS:否 制造商:Digi International 產品:ZigBee to Ethernets 處理器類型: 頻率: 隨機存取存儲器: 閃光: 數據速率: 接口類型:Ethernet, RF 工作電源電壓:5 V 最大工作溫度:+ 40 C 尺寸:70 mm x 95 mm x 32 mm
20-101-0535 功能描述:單板計算機 OP7200 Touchscreen RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0536 功能描述:單板計算機 OP7210# RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0537 功能描述:單板計算機 OP7200 TS 512K/512K RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0538 功能描述:單板計算機 OP7210 w/512K/512K RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm