In order to run this program, edit the IP address and netmask in the
參數資料
型號: 20-101-0709
廠商: Rabbit Semiconductor
文件頁數: 51/90頁
文件大?。?/td> 0K
描述: INTERFACE GRAPHIC DISPLAY OP6700
標準包裝: 1
系列: SBC
模塊/板類型: 單板計算機模塊
適用于相關產品: OP6700
其它名稱: 20-101-709
20-101-709-ND
User’s Manual
51
5.5 Run the PINGME.C Demo
In order to run this program, edit the IP address and netmask in the PINGME.C program
(SAMPLES\TCPIP\ICMP) to the values given above (10.1.1.2 and 255.255.255.248).
Compile the program and start it running under Dynamic C. The crossover cable is con-
nected from your computer’s Ethernet adapter to the Intellicom board’s RJ-45 Ethernet
connector. When the program starts running, the green LNK light on the Intellicom board
should be on to indicate an Ethernet connection is made. (Note: If the LNK light does not
light, you may not have a crossover cable, or if you are using a hub perhaps the power is
off on the hub.)
The next step is to ping the board from your PC. This can be done by bringing up the MS-DOS
window and running the pingme program:
ping 10.1.1.2
or by Start > Run
and typing the entry
ping 10.1.1.2
Notice that the red ACT light flashes on the Intellicom board while the ping is taking
place, and indicates the transfer of data. The ping routine will ping the board four times
and write a summary message on the screen describing the operation.
5.6 Running More Demo Programs With a Direct Connection
The programs STATIC.C and SSI3.C (SAMPLES\TCPIP\HTTP) demonstrate how to
make the Intellicom board be a Web server. This program allows you to turn the LEDs on
an attached Demonstration Board from the Development Kit on and off from a remote
Web browser. In order to run these sample programs, edit the IP address as for the pingme
program, compile the program and start it executing. Then bring up your Web browser and
enter the following server address: http://10.1.1.2.
This should bring up the Web page served by the sample program.
The sample program RXSAMPLE.C (SAMPLES\TELNET) allows you to communicate with
the Intellicom board using the Telnet protocol. To run this program, edit the IP address,
compile the program, and start it running. Run the Telnet program on your PC (Start >
Run telnet 10.1.1.2
). Each character you type will be printed in Dynamic C's STDIO
window, indicating that the board is receiving the characters typed via TCP/IP.
相關PDF資料
PDF描述
AT45DB081B-RI IC FLASH 8MBIT 20MHZ 28SOIC
AT45DB081B-RC IC FLASH 8MBIT 20MHZ 28SOIC
AT45DB081B-CI IC FLASH 8MBIT 20MHZ 14CBGA
AT45DB081B-CC IC FLASH 8MBIT 20MHZ 14CBGA
AT45DB041B-TC IC FLASH 4MBIT 20MHZ 28TSOP
相關代理商/技術參數
參數描述
20-101-0727 功能描述:模塊化系統 - SOM BL2010 W/ 512K FLASH RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-0732 功能描述:單板計算機 OP7100 W/512K SRAM RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0737 制造商:Digi International 功能描述:SMARTBLOCK OEM W/RTC - MOQ: 50 - Bulk 制造商:Digi International Inc 功能描述:SMARTBLOCK OEM W/RTC MOQ: 50 制造商:Rabbit Semiconductor 功能描述:Smartblock OEM w/RTC
20-101-0738 功能描述:單板計算機 SR9150 Eth 512K SRAM RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0739 制造商:Digi International 功能描述:BL1700 16IN/16OUT 512K SRAM 256K FLASH - MOQ: 25 - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:ETH CTLR BL1700 16I/O 256K FLASH 制造商:Rabbit Semiconductor 功能描述:BL1700 512K SRAM 16 In/Out 256K Flash