The following sample programs can be found in the SAMPLES\RCM3360\NAN" />
參數資料
型號： 20-101-1055
廠商： Rabbit Semiconductor
文件頁數： 85/164頁
文件大小： 0K
描述： MODULE RABBITCORE RCM3375
標準包裝： 1
系列： RabbitCore®
模塊/板類型： MPU 核心模塊
適用于相關產品： RCM3375
其它名稱： 316-1112
User’s Manual
21
3.2.1 Use of NAND Flash
The following sample programs can be found in the SAMPLES\RCM3360\NANDFlash folder.
As you run most of these sample programs, you will be prompted in the Dynamic C STDIO win-
dow to select either the
soldered-in NAND flash (RCM3365 model only) or the socketed
xD-Picture Card (0 = soldered, 1 = socketed).
NFLASH_DUMP.c
—This program is a utility for dumping the nonerased contents of a
NAND flash chip to the Dynamic C STDIO window, and the contents may be redi-
rected to a serial port.
When the sample program starts running, it attempts to communicate with the user-
selected NAND flash chip. If this communication is successful and the main page size
is acceptable, the nonerased page contents (non 0xFF) from the NAND flash page are
dumped to the Dynamic C STDIO win.for inspection.
Note that an error message might appear when the first 32 pages (0x20 pages) are
“dumped.” You may ignore the error message.
NFLASH_INSPECT.c
—This program is a utility for inspecting the contents of a
NAND flash chip. When the sample program starts running, it attempts to communi-
cate with the NAND flash chip selected by the user. Once a NAND flash chip is found,
the user can execute various commands to print out the contents of a specified page,
clear (set to zero) all the bytes in a specified page, erase (set to FF), or write to specified
pages.
CAUTION: When you run this sample program, enabling the #define NFLASH_
CANERASEBADBLOCKS
macro makes it possible to write to bad blocks. The first two
blocks on the xD-Picture Card are marked bad to protect the configuration data needed
to use the card in a digital camera or a PC. You will only be able to use the xD-Picture
Card in Rabbit-based systems if either of the first two blocks is written to.
NFLASH_LOG.c
—This program runs a simple Web server and stores a log of hits in
the NAND flash. As long as the xD-Picture Card is plugged in to its connector J6, this
sample program will log hits to the xD-Picture Card. Remove the xD-Picture Card if
you wish to log hits on the soldered-in NAND flash (RCM3365 model only).
This log can be viewed and cleared from a browser by connecting the RJ-45 jack on the
RCM3365 to your PC as described in Section 6.1. The sidebar on the next page
explains how to set up your PC or notebook to view this log.
相關PDF資料
PDF描述
20-101-0434 MODULE RABBITCORE RCM2100
046232103103800 CONN FFC/FPC 3POS 1MM R/A SMD
355-030-521-204 CARDEDGE 30POS DL .156 LOPRO BLK
355-030-521-202 CARDEDGE 30POS DL .156 LOPRO BLK
355-030-521-201 CARDEDGE 30POS DL .156 LOPRO BLK
相關代理商/技術參數
參數描述
20-101-1066 功能描述:模塊化系統 - SOM RCM3720 PROTO RS232 RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1067 功能描述:模塊化系統 - SOM RCM3305 MODULE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1068 功能描述:模塊化系統 - SOM RCM3315 MODULE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1087 制造商:Digi International 功能描述:RCM3365 RABBITSYS - Bulk 制造商:Digi International Inc 功能描述:BOARD PROTO RCM3365 RS232 制造商:Rabbit Semiconductor 功能描述:RCM3365 Rabbit Sys
20-101-1093 功能描述:模塊化系統 - SOM RCM4110 RABBIT CORE MODULE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*