- 您現在的位置：買賣IC網 > PDF目錄371439 > 29F080-70 (Macronix International Co., Ltd.) 8M-BIT [1024K x 8] CMOS EQUAL SECTOR FLASH MEMORY PDF資料下載
參數資料
| 型號： | 29F080-70 |
| 廠商： | Macronix International Co., Ltd. |
| 英文描述： | 8M-BIT [1024K x 8] CMOS EQUAL SECTOR FLASH MEMORY |
| 中文描述： | 800萬位[1024K × 8]的CMOS平等部門閃存 |
| 文件頁數： | 13/38頁 |
| 文件大?。?/td> | 678K |
| 代理商： | 29F080-70 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁當前第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁
13
P/N:PM0579
REV. 1.6, NOV. 21, 2002
MX29F080
SECTOR GROUP PROTECTION
The MX29F080 features hardware sector group protec-
tion. This feature will disable both program and erase
operations for these group sector protected. To activate
this mode, the programming equipment must force VID
on address pin A9 and control pin OE, (suggest VID =
12V) A6 = VIL and CE = VIL. (see Table 2) Program-
ming of the protection circuitry begins on the falling edge
of the WE or CE, whichever happens later pulse and is
terminated on the rising edge. Please refer to group sector
protect algorithm and waveform.
To verify programming of the protection circuitry, the pro-
gramming equipment must force VID on address pin A9
( with CE and OE at VIL and WE at VIH). When A1=1, it
will produce a logical "1" code at device output Q0 for a
protected sector. Otherwise the device will produce 00H
for the unprotected sector. In this mode, the addresses,
except for A1, are don't care. Address locations with A1
= VIL are reserved to read manufacturer and device codes.
(Read Silicon ID)
It is also possible to determine if the group is protected
in the system by writing a Read Silicon ID command.
Performing a read operation with A1=VIH, it will produce
a logical "1" at Q0 for the protected sector.
CHIP UNPROTECT
The MX29F080 also features the chip unprotect mode,
so that all sectors are unprotected after chip unprotect
is completed to incorporate any changes in the code. It
is recommended to protect all sectors before activating
chip unprotect mode.
To activate this mode, the programming equipment must
force VID on control pin OE and address pin A9. The CE
pins must be set at VIL. Pins A6 must be set to VIH.
(see Table 2) Refer to chip unprotect algorithm and wave-
form for the chip unprotect algorithm. The unprotection
mechanism begins on the falling edge of the WE or CE,
whichever happens later pulse and is terminated on the
rising edge.
POWER-UP SEQUENCE
The MX29F080 powers up in the Read only mode. In
addition, the memory contents may only be altered after
successful completion of the predefined command se-
quences.
POWER SUPPLY DECOUPLING
In order to reduce power switching effect, each device
should have a 0.1uF ceramic capacitor connected be-
tween its VCC and GND.
It is also possible to determine if the chip is unprotected
in the system by writing the Read Silicon ID command.
Performing a read operation with A1=VIH, it will produce
00H at data outputs (Q0-Q7) for an unprotected sector. It
is noted that all sectors are unprotected after the chip
unprotect algorithm is completed.
相關PDF資料 |
PDF描述 |
|---|---|
| 29F080-90 | 8M-BIT [1024K x 8] CMOS EQUAL SECTOR FLASH MEMORY |
| 29F1610 | The CAT24FC02 is a 2-kb Serial CMOS EEPROM internally organized as 256 words of 8 bits each |
| 29F1610A | The CAT24FC02 is a 2-kb Serial CMOS EEPROM internally organized as 256 words of 8 bits each |
| 29F1610A-10 | The CAT24FC02 is a 2-kb Serial CMOS EEPROM internally organized as 256 words of 8 bits each |
| 29F1610A-12 | The CAT24FC02 is a 2-kb Serial CMOS EEPROM internally organized as 256 words of 8 bits each |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 29F080-90 | 制造商:MCNIX 制造商全稱:Macronix International 功能描述:8M-BIT [1024K x 8] CMOS EQUAL SECTOR FLASH MEMORY |
| 29F080A-90PTN | 制造商:Fairchild Semiconductor Corporation 功能描述: |
| 29F080B90EC | 制造商: 功能描述: |
| 29F080B-90EC | 制造商: 功能描述: |
| 29F0818.1SR (900 PC REEL) | 制造商:Laird Technologies Inc 功能描述:INVALID, - Tape and Reel |
發布緊急采購，3分鐘左右您將得到回復。