2650 South Croddy Way
P.O. Box 25063
Santa Ana, California
92799-5063
USA
PHONE 714.556.3100
SALES FAX 714.241.9061
www.cole-switches.com
ISO9001 CERTIFIED
3600 SERIES
One Inch Multi-Deck Enclosed Rotary Switches
3600 PULL/PUSH
ELECTRICAL SCHEMATIC DIAGRAM
(VIEWED FROM SHAFT END,
SHOWN IN POSITION 1, SHORTING
CONTACTS)
DESCRIPTION:
A rotary switch can be congured such that one or
more positions can’t contacted without pulling or
pushing the switch shaft, in addition of the required
torque.
The isolated switch has the exibility of ordering
which position or combination of positions to be iso-
lated. The isolation posts to be inserted adjacent to
the position to be isolated. For multi-pole, the rst
pole isolation post and stop location will determine
the isolation pattern for the additional poles.
ORDERING INFORMATION
Create the part number using this example:
SPECIAL ORDERING INFORMATION
Indicate this as SPECIAL switch to ensure that no
error is made when the order is entered and create
the special ordering information using the following
conventional symbols:
D = Specifying Detent Position
STOP = Specifying stops
PL = Specifying actuation by pulling the shaft out
PS = Specifying actuation by pushing the shaft in
Sample part number:
This sample part number orders a series 3600,
36° indexing, 2 poles, 5 position per pole shorting,
1 deck, and push to turn isolation posts between
positions 1-2, 2-3 and 3-4.
Although somewhat long, use of this numbering
scheme will prevent error in orders processing. Upon
receipt of your order, a special number will be issued
unique to this switch. These numbers will not relate
to the coding system and will be logged as “special”.
The acknowledgment of your order will identify this
number. Your specic switch will be the only one
identied by this number
FOR DIFFERENT REQUIREMENTS PLEASE
CONTACT THE FACTORY.
SPECIAL
3636 - 205 - 1S
STOP1PS2PS3PS4D5STOP
MECHANICAL SCHEMATIC DIAGRAM
(VIEWED FROM SHAFT END,
ISOLATION STOPS PULL OR PUSH TO
ROTATE CLOCKWISE
MECHANICAL SCHEMATIC DIAGRAM
(VIEWED FROM SHAFT END,
ISOLATION STOPS PULL OR PUSH TO
ROTATE COUNTER CLOCKWISE
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specied, tolerances are ±.005 and ±3° on angles (Non-accumulative).
3600 Series/Page 5