2650 South Croddy Way
P.O. Box 25063
Santa Ana, California
92799-5063
USA
PHONE 714.556.3100
SALES FAX 714.241.9061
www.cole-switches.com
ISO9001 CERTIFIED
3600 SERIES
One Inch Multi-Deck Enclosed Rotary Switches
DESCRIPTION:
A spring return rotary switch requires that manual
torque be maintained at the desired switch position.
Releasing the force allows the spring to return the
contact to a normal, or detent positions. Arrows in the
CONFIGURATIONS AND RESTRICTIONS TABLE
indicate the direction the spring will return the contact so
it assumes a normal detent position, the “D” designates
a normal detent position.
ORDERING INFORMATION
Create the part number using this example:
3600 SPRING RETURN
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specied, tolerances are ± .005 and ± 3° on angles (non-accumulative).
3. Shaft at opposite position being made.
SPECIAL ORDERING INFORMATION
Indicate this as SPECIAL switch to ensure that no error
is made when the order is entered and create the special
ordering information using the following conventional
symbols:
D = Specifying Detent Position
STOP = Specifying stops
Direction of Spring Return
Sample part number:
This sample part number orders a series 3600, 45°
indexing, 2 poles, 4 position per pole shorting, 1 deck,
momentary terminal 4 returning to terminal 3 (8 to 7 is
slaved).
Although somewhat long, use of this numbering scheme
will prevent error in orders processing. Upon receipt of
your order, a special number will be issued unique to this
switch. These numbers will not relate to the coding system
and will be logged as “special”.
The acknowledgment of your order will identify this number.
Your specic switch will be the only one identied by this
number
FOR DIFFERENT REQUIREMENTS PLEASE CONTACT
THE FACTORY.
SPECIAL
3645 - 204 - 1S
STOP1D2D3 4STOP
SCHEMATIC DIAGRAM
(VIEWED FROM SHAFT END)
(POSITION 1 AND 3 MOMENTARY)
3600 Series/Page 7