參數資料
型號: 73S1215F-44IMR/F/P
廠商: Maxim Integrated Products
文件頁數: 9/136頁
文件大小: 0K
描述: IC SMART CARD READER PROG 44-QFN
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 2,500
系列: 73S12xx
核心處理器: 80515
芯體尺寸: 8-位
速度: 24MHz
連通性: I²C,智能卡,UART/USART,USB
外圍設備: LED,POR,WDT
輸入/輸出數: 9
程序存儲器容量: 64KB(64K x 8)
程序存儲器類型: 閃存
RAM 容量: 2K x 8
電壓 - 電源 (Vcc/Vdd): 2.7 V ~ 5.5 V
振蕩器型: 內部
工作溫度: -40°C ~ 85°C
封裝/外殼: 44-VFQFN 裸露焊盤
包裝: 帶卷 (TR)
73S1215F Data Sheet
DS_1215F_003
106
Rev. 1.4
Block Guard Time Register (BGT): 0xFE16
0x10
This register contains the Extra Guard Time Value (EGT) most-significant bit. The Extra Guard Time
indicates the minimum time between the leading edges of the start bit of consecutive characters. The
delay is depends on the T=0/T=1 mode. Used in transmit mode. This register also contains the Block
Guard Time (BGT) value. Block Guard Time is the minimum time between the leading edge of the start
bit of the last character received and the leading edge of the start bit of the first character transmitted.
This should not be set less than the character length. The transmission of the first character will be held
off until BGT has elapsed regardless of the TX data and TX/RX control bit timing.
Table 105: The BGT Register
MSB
LSB
EGT.8
BGT.4
BGT.3
BGT.1
BGT.2
BGT.0
Bit
Symbol
Function
BGT.7
EGT.8
Most-significant bit for 9-bit EGT timer. See EGT below.
BGT.6
BGT.5
BGT.4
Time in ETUs between the start bit of the last received character to start bit
of the first character transmitted to the smart card. Default value is 22.
BGT.3
BGT.2
BGT.1
BGT.0
Extra Guard Time Register (EGT): 0xFE17
0x0C
This register contains the Extra Guard Time Value (EGT) least-significant byte. The Extra Guard Time
indicates the minimum time between the leading edges of the start bit of consecutive characters. The
delay is depends on the T=0/T=1 mode. Used in transmit mode.
Table 106: The EGT Register
MSB
LSB
EGT.7
EGT.6
EGT.5
EGT.4
EGT.3
EGT.1
EGT.2
EGT.0
Bit
Function
EGT.7
Time in ETUs between start bits of consecutive characters. In T=0 mode, the minimum is
1. In T=0, the leading edge of the next start bit may be delayed if there is a break detected
from the smart card. Default value is 12. In T=0 mode, regardless of the value loaded, the
minimum value is 12, and for T=1 mode, the minimum value is 11.
EGT.6
EGT.5
EGT.4
EGT.3
EGT.2
EGT.1
EGT.0
相關PDF資料
PDF描述
73S1215F-44IM/F/P IC SMART CARD READER PROG 44-QFN
73S1210F-68IM/F/P IC SMART CARD READER PROG 68-QFN
73S1210F-44IMR/F/P IC SMART CARD READER PROG 44-QFN
MAXQ613E-0000+ IC MCU 16BIT IR MOD 32LQPF
73S1210F-44IM/F/P IC SMART CARD READER PROG 44-QFN
相關代理商/技術參數
參數描述
73S1215F-44MR/F/PC 制造商:Maxim Integrated Products 功能描述:MXM73S1215F-44MR/F/PC SCR +PIN PAD, SRL
73S1215F-68IM/F 功能描述:8位微控制器 -MCU 80515 SoC w/USB & PINpad RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
73S1215F-68IM/F/P 功能描述:IC SMART CARD READER PROG 68-QFN RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:73S12xx 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:260 系列:73S12xx 核心處理器:80515 芯體尺寸:8-位 速度:24MHz 連通性:I²C,智能卡,UART/USART,USB 外圍設備:LED,POR,WDT 輸入/輸出數:9 程序存儲器容量:64KB(64K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:2K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-VFQFN 裸露焊盤 包裝:管件
73S1215F-68IM/F/PB 功能描述:8位微控制器 -MCU 73S1215F-68IM/F WITH FACTORY LOADED FIRMW RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
73S1215F68IMLV1.15 制造商:Maxim Integrated Products 功能描述:8-bit Microcontrollers - MCU 80515 SoC w/USB & PINpad