![](http://datasheet.mmic.net.cn/Maxim-Integrated-Products/73S8024RN-32IMR-F_datasheet_95685/73S8024RN-32IMR-F_16.png)
73S8024RN Data Sheet
DS_8024RN_020
16
Rev. 2
12 Electrical Specification
12.1 Absolute Maximum Ratings
Operation outside these rating limits may cause permanent damage to the device. The smart card
interface pins are protected against short circuits to VCC, ground, and each other.
Parameter
Rating
Supply Voltage VDD
-0.5 to 6.0 VDC
Supply Voltage VPC
-0.5 to 6.0 VDC
Input Voltage for Digital Inputs
-0.3 to (VDD +0.5) VDC
Storage Temperature
-60 to 150°C
Pin Voltage (except card interface)
-0.3 to (VDD +0.5) VDC
Pin Voltage (card interface)
-0.3 to (VCC + 0.5) VDC
ESD Tolerance – Card interface pins
+/- 6kV
ESD Tolerance – Other pins
+/- 2kV
*Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.
12.2 Recommended Operating Conditions
Parameter
Rating
Supply Voltage VDD
2.7 to 5.5 VDC
Supply Voltage VPC
4.75 to 5.5 VDC
NDS Supply Voltage VPC
4.85 to 5.5 VDC
Ambient Operating Temperature
-40°C to +85°C
Input Voltage for Digital Inputs
0V to VDD + 0.3V
12.3 Package Thermal Parameters
Package
Rating
28 SO
44 °C / W
32QFN
47 °C / W (with bottom pad soldered)
32QFN
78 °C / W (without bottom pad soldered)
20QFN
53 °C / W (with the bottom pad soldered)
20QFN
90 °C / W (without the bottom pad soldered)