參數資料
型號: 935189960118
廠商: NXP SEMICONDUCTORS
元件分類: FIFO
英文描述: 16 X 4 OTHER FIFO, 120 ns, PDSO16
封裝: 5.30 MM, PLASTIC, MO-150AC, SOT-338-1, SSOP-16
文件頁數: 2/25頁
文件大?。?/td> 178K
代理商: 935189960118
10
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
Figure 4-5.
Single Cycle ALU Operation
4.7
Reset and Interrupt Handling
The AVR provides several different interrupt sources. These interrupts and the separate Reset Vector each have a
separate Program Vector in the program memory space. All interrupts are assigned individual enable bits which
must be written logic one together with the Global Interrupt Enable bit in the Status Register in order to enable the
interrupt.
The lowest addresses in the program memory space are by default defined as the Reset and Interrupt Vectors.
The complete list of vectors is shown in “Interrupts” on page 35. The list also determines the priority levels of the
different interrupts. The lower the address the higher is the priority level. RESET has the highest priority, and next
is INT0 – the External Interrupt Request 0.
When an interrupt occurs, the Global Interrupt Enable I-bit is cleared and all interrupts are disabled. The user soft-
ware can write logic one to the I-bit to enable nested interrupts. All enabled interrupts can then interrupt the current
interrupt routine. The I-bit is automatically set when a Return from Interrupt instruction – RETI – is executed.
There are basically two types of interrupts. The first type is triggered by an event that sets the Interrupt Flag. For
these interrupts, the Program Counter is vectored to the actual Interrupt Vector in order to execute the interrupt
handling routine, and hardware clears the corresponding Interrupt Flag. Interrupt Flags can also be cleared by writ-
ing a logic one to the flag bit position(s) to be cleared. If an interrupt condition occurs while the corresponding
interrupt enable bit is cleared, the Interrupt Flag will be set and remembered until the interrupt is enabled, or the
flag is cleared by software. Similarly, if one or more interrupt conditions occur while the Global Interrupt Enable bit
is cleared, the corresponding Interrupt Flag(s) will be set and remembered until the Global Interrupt Enable bit is
set, and will then be executed by order of priority.
The second type of interrupts will trigger as long as the interrupt condition is present. These interrupts do not nec-
essarily have Interrupt Flags. If the interrupt condition disappears before the interrupt is enabled, the interrupt will
not be triggered.
When the AVR exits from an interrupt, it will always return to the main program and execute one more instruction
before any pending interrupt is served.
Note that the Status Register is not automatically stored when entering an interrupt routine, nor restored when
returning from an interrupt routine. This must be handled by software.
When using the CLI instruction to disable interrupts, the interrupts will be immediately disabled. No interrupt will be
executed after the CLI instruction, even if it occurs simultaneously with the CLI instruction.
Total Execution Time
Register Operands Fetch
ALU Operation Execute
Result Write Back
T1
T2
T3
T4
clk
CPU
相關PDF資料
PDF描述
933715220112 16 X 4 OTHER FIFO, 120 ns, PDSO16
935189070118 16 X 4 OTHER FIFO, 600 ns, PDSO16
935189960112 16 X 4 OTHER FIFO, 120 ns, PDSO16
935189350112 16 X 4 OTHER FIFO, 600 ns, PDSO16
933715220118 16 X 4 OTHER FIFO, 120 ns, PDSO16
相關代理商/技術參數
參數描述
9351MC2-BKV 制造商:BEVCO Ergonomic Seating 功能描述:DELUXE CLEANROOM TASK STOOL ON GLIDES W/FOOTRING, Approval Categories:Certified 制造商:BEVCO Ergonomic Seating 功能描述:DELUXE CLEANROOM TASK STOOL ON GLIDES W/FOOTRING, Body Material:Vinyl Seat & Back, Foam Padding, Polyproplene Backshell, Aluminum Base, Color:Black, For Use With:Bevco A5 Adjustable Armrests & 3850S/5 Dual-Wheel Hard-Floor Casters , RoHS Compliant: NA
9351MC2-BLV 制造商:BEVCO Ergonomic Seating 功能描述:DELUXE CLEANROOM TASK STOOL ON GLIDES W/FOOTRING, Body Material:Vinyl Seat & Back, Foam Padding, Polyproplene Backshell, Aluminum Base, Color:Royal Blue, Series:9000, Size:Seat: 20"W x 18"D x 3"H, Back: 17.5"W x 16"H x 3"D , RoHS Compliant: NA
9351ME-CH 制造商:BEVCO Ergonomic Seating 功能描述:DELUXE ESD TASK STOOL ON GLIDES W/FOOTRING, Body Material:ESD Fabric Seat & Back, Foam Padding, ESD Polyproplene Backshell, Aluminum Base, Color:Charcoal, Series:9000, Size:Seat: 20"W x 18"D x 3"H, Back: 17.5"W x 16"H x 3"D , RoHS Compliant: NA
9351ME-NY 制造商:BEVCO Ergonomic Seating 功能描述:DELUXE ESD TASK STOOL ON GLIDES W/FOOTRING, Approval Categories:Exceeds ANSI/BIF 制造商:BEVCO Ergonomic Seating 功能描述:DELUXE ESD TASK STOOL ON GLIDES W/FOOTRING, Body Material:ESD Fabric Seat & Back, Foam Padding, ESD Polyproplene Backshell, Aluminum Base, Color:Navy Blue, Series:9000, Size:Seat: 20"W x 18"D x 3"H, Back: 17.5"W x 16"H x 3"D , RoHS Compliant: NA
9352 功能描述:螺絲和緊固件 1" 10-32 NYLON PAN RoHS:否 制造商:Unspecified 產品: 類型:Washer 螺紋大小: 長度: 材料:Steel 電鍍:Nickel 螺絲頭: 螺絲類型: