- 您現在的位置：買賣IC網 > PDF目錄8967 > AD7840JNZ (Analog Devices Inc)IC DAC 14BIT LC2MOS LP 24-DIP PDF資料下載
參數資料
| 型號： | AD7840JNZ |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 11/16頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC DAC 14BIT LC2MOS LP 24-DIP |
| 產品培訓模塊： | Data Converter Fundamentals DAC Architectures |
| 標準包裝： | 15 |
| 設置時間： | 2.5µs |
| 位數： | 14 |
| 數據接口： | 串行，并聯 |
| 轉換器數目： | 1 |
| 電壓電源： | 雙 ± |
| 功率耗散（最大）： | 100mW |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 通孔 |
| 封裝/外殼： | 24-DIP（0.300"，7.62mm） |
| 供應商設備封裝： | 24-PDIP |
| 包裝： | 管件 |
| 輸出數目和類型： | 1 電壓，雙極 |
| 采樣率（每秒）： | 400k |
| 產品目錄頁面： | 785 (CN2011-ZH PDF) |
AD7840
REV. B
–4–
PIN FUNCTION DESCRIPTION
DIP
Pin
No.
Mnemonic
Function
1
CS
/SERIAL
Chip Select/Serial Input. When driven with normal logic levels, it is an active low logic input which is used
in conjunction with WR to load parallel data to the input latch. For applications where CS is perma-
nently low, an R, C is required for correct power-up (see LDAC input). If this input is tied to VSS, it de-
fines the AD7840 for serial mode operation.
2
WR/SYNC
Write/Frame Synchronization Input. In the parallel data mode, it is used in conjunction with CS to load
parallel data. In the serial mode of operation, this pin functions as a Frame Synchronization pulse with se-
rial data expected after the falling edge of this signal.
3
D13/SDATA
Data Bit 13(MSB)/Serial Data. When parallel data is selected, this pin is the D13 input. In serial mode,
SDATA is the serial data input which is used in conjunction with SYNC and SCLK to transfer serial data
to the AD7840 input latch.
4
D12/SCLK
Data Bit 12/Serial Clock. When parallel data is selected, this pin is the D12 input. In the serial mode, it is
the serial clock input. Serial data bits are latched on the falling edge of SCLK when SYNC is low.
5
D11/FORMAT
Data Bit 11/Data Format. When parallel data is selected, this pin is the D11 input. In serial mode, a Logic
1 on this input indicates that the MSB is the first valid bit in the serial data stream. A Logic 0 indicates
that the LSB is the first valid bit (see Table I).
6
D10/JUSTIFY
Data Bit 10/Data Justification. When parallel data is selected, this pin is the D10 input. In serial mode,
this input controls the serial data justification (see Table I).
7–11
D9–D5
Data Bit 9 to Data Bit 5. Parallel data inputs.
12
DGND
Digital Ground. Ground reference for digital circuitry.
13–16
D4–D1
Data Bit 4 to Data Bit 1. Parallel data inputs.
17
D0
Data Bit 0 (LSB). Parallel data input.
18
VDD
Positive Supply, +5 V
± 5%.
19
AGND
Analog Ground. Ground reference for DAC, reference and output buffer amplifier.
20
VOUT
Analog Output Voltage. This is the buffer amplifier output voltage. Bipolar output range (
±3 V with REF
IN = +3 V).
21
VSS
Negative Supply Voltage, –5 V
± 5%.
22
REF OUT
Voltage Reference Output. The internal 3 V analog reference is provided at this pin. To operate the
AD7840 with internal reference, REF OUT should be connected to REF IN. The external load capability
of the reference is 500
A.
23
REF IN
Voltage Reference Input. The reference voltage for the DAC is applied to this pin. It is internally buffered
before being applied to the DAC. The nominal reference voltage for correct operation of the AD7840 is
3 V.
24
LDAC
Load DAC. Logic Input. A new word is loaded into the DAC latch from the input latch on the falling
edge of this signal (see Interface Logic Information section). The AD7840 should be powered-up with
LDAC
high. For applications where LDAC is permanently low, an R, C is required for correct power-up
(see Figure 19).
Table I. Serial Data Modes
相關PDF資料 |
PDF描述 |
|---|---|
| AD9765ASTZ | IC DAC 12BIT DUAL 125MSPS 48LQFP |
| MS3120F16-8S | CONN RCPT 8POS WALL MNT W/SCKT |
| VI-J4B-MZ-F1 | CONVERTER MOD DC/DC 95V 25W |
| VI-24Z-MU-F1 | CONVERTER MOD DC/DC 2V 80W |
| MS27468T25F19PC | CONN RCPT 19POS JAM NUT W/PINS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7840JNZ | 制造商:Analog Devices 功能描述:IC 14-BIT DAC |
| AD7840JP | 功能描述:IC DAC 14BIT LC2MOS VOUT 28PLCC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯 轉換器數目:1 電壓電源:雙 ± 功率耗散（最大）:100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC（J 形引線） 供應商設備封裝:28-PLCC（11.51x11.51） 包裝:帶卷 (TR) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:143k |
| AD7840JP-REEL | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD7840JPZ | 功能描述:IC DAC 14BIT LC2MOS VOUT 28PLCC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| AD7840JPZ-REEL | 功能描述:IC DAC 14BIT LC2MOS 28PLCC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:Data Converter Fundamentals DAC Architectures 標準包裝:750 系列:- 設置時間:7µs 位數:16 數據接口:并聯 轉換器數目:1 電壓電源:雙 ± 功率耗散（最大）:100mW 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-LCC（J 形引線） 供應商設備封裝:28-PLCC（11.51x11.51） 包裝:帶卷 (TR) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:143k |
發布緊急采購，3分鐘左右您將得到回復。