ProASICPLUS Flash Family FPGAs 2- 10 v5.9 Timing Control and Characteristics
參數資料
型號： APA300-CQ352B
廠商： Microsemi SoC
文件頁數： 92/178頁
文件大小： 0K
描述： IC FPGA PROASIC+ 300K 352-CQFP
標準包裝： 1
系列： ProASICPLUS
RAM 位總計： 73728
輸入/輸出數： 248
門數： 300000
電源電壓： 2.3 V ~ 2.7 V
安裝類型： 表面貼裝
封裝/外殼： 352-BFCQFP，帶拉桿
供應商設備封裝： 352-CQFP（75x75）
ProASICPLUS Flash Family FPGAs
2- 10
v5.9
Timing Control and
Characteristics
ProASICPLUS Clock Management System
ProASICPLUS devices provide designers with very flexible
clock conditioning capabilities. Each member of the
ProASICPLUS family contains two phase-locked loop (PLL)
blocks which perform the following functions:
Clock Phase Adjustment via Programmable Delay
(250 ps steps from –7 ns to +8 ns)
Clock Skew Minimization
Clock Frequency Synthesis
Each PLL has the following key features:
Input Frequency Range (fIN) = 1.5 to 180 MHz
Feedback Frequency Range (fVCO) = 24 to 180 MHz
Output Frequency Range (fOUT) = 8 to 180 MHz
Output Phase Shift = 0 ° and 180 °
Output Duty Cycle = 50%
Low Output Jitter (maximum at 25°C)
–fVCO <10 MHz. Jitter ±1% or better
–
10 MHz < fVCO < 60 MHz. Jitter ±2% or better
–fVCO > 60 MHz. Jitter ±1% or better
Note: Jitter (ps) = Jitter (%) × period
For Example:
Low Power Consumption – 6.9 mW (max. – analog
supply) + 7.0 W/MHz (max. – digital supply)
Physical Implementation
Each side of the chip contains a clock conditioning circuit
based on a 180 MHz PLL block (Figure 2-11 on page
2-11). Two global multiplexed lines extend along each
side of the chip to provide bidirectional access to the PLL
on that side (neither MUX can be connected to the
opposite side's PLL). Each global line has optional LVPECL
input pads (described below). The global lines may be
driven by either the LVPECL global input pad or the
outputs from the PLL block, or both. Each global line can
be driven by a different output from the PLL. Unused
global pins can be configured as regular I/Os or left
unconnected. They default to an input with pull-up. The
two signals available to drive the global networks are as
Global A (secondary clock)
Output from Global MUX A
Conditioned version of PLL output (fOUT) – delayed
or advanced
Divided version of either of the above
Further delayed version of either of the above
(0.25 ns, 0.50 ns, or 4.00 ns delay)1
Global B
Output from Global MUX B
Delayed or advanced version of fOUT
Divided version of either of the above
Further delayed version of either of the above
(0.25 ns, 0.50 ns, or 4.00 ns delay)2
Functional Description
Each PLL block contains four programmable dividers as
shown in Figure 2-11 on page 2-11. These allow
frequency scaling of the input clock signal as follows:
The n divider divides the input clock by integer
factors from 1 to 32.
The m divider in the feedback path allows
multiplication of the input clock by integer factors
ranging from 1 to 64.
The two dividers together can implement any
combination
of
multiplication
and
division
resulting in a clock frequency between 24 and 180
MHz exiting the PLL core. This clock has a fixed
50% duty cycle.
The output frequency of the PLL core is given by
the formula in EQ 2-1 (fREF is the reference clock
frequency):
fOUT = fREF × m ÷ n
EQ 2-1
The third and fourth dividers (u and v) permit the
signals applied to the global network to each be
further divided by integer factors ranging from 1
to 4.
The implementations shown in EQ 2-2 and EQ 2-3 enable
the user to define a wide range of frequency multiplier
and divisors.
EQ 2-2
EQ 2-3
Jitter in picoseconds at 100 MHz = 0.01 × (1/100E6) = 100 ps
Maximum Acquisition
Time
= 80 s for fVCO > 40 MHz
= 30 s for fVCO < 40 MHz
1. This mode is available through the delay feature of the global MUX driver.
f
GLB
m
nu
×
()
-----------------
=
f
GLA
m
nv
×
()
-----------------
=
相關PDF資料
PDF描述
A42MX36-CQ256 IC FPGA MX SGL CHIP 54K 256-CQFP
93C46AT-I/ST IC EEPROM 1KBIT 2MHZ 8TSSOP
EP2AGX260FF35C6 IC ARRIA II GX 260K 1152FBGA
EP2AGX190FF35I5N IC ARRIA II GX 190K 1152FBGA
EP2AGX190FF35C4N IC ARRIA II GX 190K 1152FBGA
相關代理商/技術參數
參數描述
APA300-CQ352M 制造商:Microsemi Corporation 功能描述:FPGA PROASICPLUS 300K GATES 180MHZ 0.22UM 2.5V 352CQFP - Trays 制造商:Microsemi Corporation 功能描述:IC FPGA PROASIC+ 300K 352CQFP 制造商:Microsemi Corporation 功能描述:IC FPGA 248 I/O 352CQFP
APA300-CQB 制造商:ACTEL 制造商全稱:Actel Corporation 功能描述:ProASIC Flash Family FPGAs
APA300-CQES 制造商:ACTEL 制造商全稱:Actel Corporation 功能描述:ProASIC Flash Family FPGAs
APA300-CQGB 制造商:ACTEL 制造商全稱:Actel Corporation 功能描述:ProASIC Flash Family FPGAs
APA300-CQGES 制造商:ACTEL 制造商全稱:Actel Corporation 功能描述:ProASIC Flash Family FPGAs
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*