CM2030
http://onsemi.com
9
PERFORMANCE INFORMATION
Typical Filter Performance (TA = 25°C, DC Bias = 0 V, 50 W Environment)
Figure 8. Insertion Loss vs. Frequency (TMDS_D1 to GND)
APPLICATION INFORMATION
Design Considerations
5V_OUT (pin 38)
Maximum overcurrent protection output drop at 55 mA on 5V_OUT is 100 mV. To meet HDMI output requirements of
4.85.3 V, an input of greater than 4.9 V should be used (i.e. 5.1 V
±4%)
DUT On vs. DUT Off
Many HDMI CTS tests require a power off condition on the System Under Test. Many discrete ESD diode configurations
can be forward biased when their VDD rail is lower than the I/O pin bias, thereby exhibiting extremely high apparent
capacitance measurements, for example. The MediaGuardt backdrive isolation circuitry limits this current to less than 5 mA,
and will help ensure HDMI compliance.