CM2030
http://onsemi.com
7
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
VCC5, VCCLV
6.0
V
DC Voltage at any Channel Input
[GND 0.5] to [VCC + 0.5]
V
Storage Temperature Range
65 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 3. STANDARD (RECOMMENDED) OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Units
5V_SUPPLY Operating Supply Voltage
5
5.5
V
LV_SUPPLY Bias Supply Voltage
1.0
3.3
5.5
V
CE_SUPPLY Bias Supply Voltage
3.0
3.3
3.6
V
Operating Temperature Range
–40
85
°C
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 7) Symbol
Parameter
Conditions
Min
Typ
Max
Units
ICC5
Operating Supply Current
5V_SUPPLY = 5.0 V,
CEC_OUT = 3.3 V,
LV_SUPPLY = 3.3 V,
CE_SUPPLY = 3.3 V, DDC = 5 V
300
350
mA
ICCLV
Bias Supply Current
LV_SUPPLY = 3.3 V (Note
12)
60
150
mA
ICCCE
Bias Supply Current
CE_SUPPLY = 3.3 V, CEC_OUT = 0 V
60
150
mA
ICEC
Current Source on CEC Pin
CE_SUPPLY = 3.3 V,
111
120
128
m
A
VDROP
5V_OUT Overcurrent Out Put Drop
5V_SUPPLY = 5.0 V, IOUT = 55 mA
65
100
mV
ISC
5V_OUT Short Circuit Cur Rent Limit
5V_SUPPLY = 5.0 V, 5V_OUT = GND
90
135
175
mA
IOFF
OFF State Leakage Current, Level Shifting
NFET
LV_SUPPLY = 0 V
0.1
5
mA
IBACKDRIVE,
CEC
Current Through CEREMOTE_OUT when
Powered Down
CEREMOTE_IN = CE_SUPPLY <
CE_REMOTE_OUT
0.1
1.8
mA
IBACKDRIVE,
TMDS
Current Through TMDS Pins when Powered
Down
All Supplies = 0 V,
TMDS_[2:0]+/, TMDS_CK+/ = 4 V
0.1
5
mA
IBACKDRIVE,
5V_OUT
Current Through 5V_OUT when Powered
Down
All Supplies = 0 V,
5V_OUT_PIN = 5 V
0.1
5
mA
IBACKDRIVE,
DDC
Current Through DDC_DAT/CLK_OUT when
Powered Down
All Supplies = 0 V,
DDC_DAT/CLK_OUT = 5 V,
DDC_DAT/CLK_IN = 0 V
0.1
5
mA
IBACKDRIVE,
HOTPLUG
Current Through HOTPLUG_DET_OUT when
Powered Down
All Supplies = 0 V,
HOTPLUG_DET_OUT = 5 V,
HOTPLUG_IN = 0 V
0.1
5
mA
CECSL
CEC Slew Limit
Measured from 1090% or 9010%
0.26
0.65
V/ms
7. Operating Characteristics are over Standard Operating Conditions unless otherwise specified.
8. Standard IEC6100042, CDISCHARGE = 150 pF, RDISCHARGE = 330 W, 5V_SUPPLY = 5 V, 3.3V_SUPPLY = 3.3 V, LV_SUPPLY = 3.3 V, GND = 0 V.
9. Human Body Model per MILSTD883, Method 3015, CDISCHARGE = 100 pF, RDISCHARGE = 1.5 kW, 5V_SUPPLY = 5V, 3.3V_SUP- PLY = 3.3 V, LV_SUPPLY = 3.3 V, GND = 0 V.
10.Intrapair matching, each TMDS pair (i.e. D+, D–)
11. These measurements performed with no external capacitor on VP (VP floating) 12.These static measurements do not include AC activity on controlled I/O lines.
13.This measurement does not inclue supply current for the 120 mA current source on the CEC pin.