參數資料
型號： DS2151QN
廠商： Maxim Integrated Products
文件頁數： 9/60頁
文件大?。?/td> 0K
描述： IC TXRX T1 1-CH 5V LP IND 44PLCC
標準包裝： 1
功能： 單芯片收發器
接口： T1
電路數： 1
電源電壓： 4.75 V ~ 5.25 V
電流 - 電源： 65mA
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 44-LCC（J 形引線）
供應商設備封裝： 44-PLCC（16.59x16.59）
包裝： 管件
包括： 警報檢測器和發生器，CSU 回路代碼發生器和檢測器，DSX-1和CSU 線路補償發生器
DS2151Q
17 of 60
CCR3: COMMON CONTROL REGISTER 3 (Address = 30 Hex)
(MSB)
(LSB)
ESMDM
ESR
P16F
RSMS
PDE
TLD
TLU
LIRST
SYMBOL
POSITION
NAME AND DESCRIPTION
ESMDM
CCR3.7
Elastic Store Minimum Delay Mode. See Section 11 for
details.
0=elastic stores operate at full two-frame depth
1=elastic stores operate at 32-bit depth
ESR
CCR3.6
Elastic Store Reset. Setting this bit from a 0 to a 1 will force
the elastic stores to a known depth. Should be toggled after
SYSCLK has been applied and is stable. Must be cleared and
set again for a subsequent reset.
P16F
CCR3.5
Function of Pin 16.
0 = Receive Loss of Sync (RLOS).
1 = Loss of Transmit Clock (LOTC).
RSMS
CCR3.4
RSYNC Multiframe Skip Control. Useful in framing format
conversions from D4 to ESF.
0 = RSYNC will output a pulse at every multiframe
1 = RSYNC will output a pulse at every other multiframe note:
for this bit to have any affect, the RSYNC must be set to output
multiframe pulses (RCR2.4 = 1 and RCR2.3 = 0) and the
receive elastic store must be bypassed. (CCR1.2 = 0).
PDE
CCR3.3
Pulse Density Enforcer Enable.
0 = disable transmit pulse density enforcer
1 = enable transmit pulse density enforcer
TLD
CCR3.2
Transmit Loop Down Code (001).
0 = transmit data normally
1 = replace normal transmitted data with Loop Down code
TLU
CCR3.1
Transmit Loop Up Code (00001).
0 = transmit data normally
1 = replace normal transmitted data with Loop Up code
LIRST
CCR3.0
Line Interface Reset. Setting this bit from a 0 to a one will
initiate an internal reset that affects the slicer, AGC, clock
recovery state machine and jitter attenuator. Normally this bit is
only toggled on power-up. Must be cleared and set again for a
subsequent reset.
相關PDF資料
PDF描述
DS2152L+ IC TXRX T1 1CHIP ENHNCD 100-LQFP
DS2153Q-A7+T&R IC TXRX E1 1-CHIP 5V 44-PLCC
DS2154LNA2+ IC TXRX E1 5V 100-LQFP
DS2154L IC TXRX E1 1CHIP 5V ENH 100-LQFP
DS2155LN IC TXRX T1/E1/J1 1-CHIP 100-LQFP
相關代理商/技術參數
參數描述
DS2151QN/T&R+ 制造商:Maxim Integrated Products 功能描述:FRAMER DS1/E1/ISDN-PRI/T1 5V 44PLCC - Tape and Reel
DS2151QN/T&R 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2151QNB 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2151QNB/T&R 制造商:Maxim Integrated Products 功能描述:T1 SINGLE CHIP XCVR REV B IND - Tape and Reel
DS2151QNB/T&R 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*