參數資料
型號： DS21554LN
廠商： Maxim Integrated Products
文件頁數： 95/124頁
文件大小： 0K
描述： IC TXRX E1 1-CHIP 5V 100-LQFP
產品培訓模塊： Lead (SnPb) Finish for COTS
產品變化通告： Product Discontinuation 20/Feb/2012
標準包裝： 90
功能： 單芯片收發器
接口： E1，HDLC，J1，T1
電路數： 1
電源電壓： 4.75 V ~ 5.25 V
電流 - 電源： 75mA
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 100-LQFP
供應商設備封裝： 100-LQFP（14x14）
包裝： 托盤
包括： 遠程和 AIS 警報檢測器 / 發生器
DS21354/DS21554 3.3V/5V E1 Single-Chip Transceivers
72 of 124
14.3.
Basic Operation Details
As a basic guideline for interpreting and sending HDLC messages, the following sequences can be
applied:
14.3.1.
Example: Receive an HDLC Message
1. Enable RPS interrupts
2. Wait for interrupt to occur
3. Disable RPS interrupt and enable either RPE, RNE, or RHALF interrupt
4. Read RHIR to obtain REMPTY status
a. If REMPTY=0, then record OBYTE, CBYTE, and POK bits and then read the FIFO
a1. if CBYTE = 0 then skip to step 5
a2. if CBYTE = 1 then skip to step 7
b. If REMPTY = 1, then skip to step 6
5. Repeat step 4
6. Wait for interrupt, skip to step 4
7. If POK = 0, then discard whole packet, if POK = 1, accept the packet
a. Disable RPE, RNE, or RHALF interrupt, enable RPS interrupt and return to step 1.
14.3.2.
Example: Transmit an HDLC Message
1. Make sure HDLC controller is done sending any previous messages and is current sending flags by
checking that the FIFO is empty by reading the TEMPTY status bit in the THIR register
2. Enable either the THALF or TNF interrupt
3. Read THIR to obtain TFULL status
a. If TFULL = 0, then write a byte into the FIFO and skip to next step (special case occurs when
the last byte is to be written, in this case set TEOM = 1 before writing the byte and then skip
to step 6)
b. If TFULL = 1, then skip to step 5
4. Repeat step 3
5. Wait for interrupt, skip to step 3
6. Disable THALF or TNF interrupt and enable TMEND interrupt
7. Wait for an interrupt, then read TUDR status bit to make sure packet was transmitted correctly.
相關PDF資料
PDF描述
DS21552G IC TXRX T1 1-CHIP 5V 100-BGA
VE-B6Y-IV-S CONVERTER MOD DC/DC 3.3V 99W
VE-B6X-IY-B1 CONVERTER MOD DC/DC 5.2V 50W
VE-B6W-IY-B1 CONVERTER MOD DC/DC 5.5V 50W
VE-B6V-IY-B1 CONVERTER MOD DC/DC 5.8V 50W
相關代理商/技術參數
參數描述
DS21554LN+ 功能描述:網絡控制器與處理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2155DK 功能描述:網絡開發工具 RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
DS2155G 功能描述:網絡控制器與處理器 IC T1/E1/J1 Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2155G/T&R 制造商:Maxim Integrated Products 功能描述:DS2155 T1/E1/J1 SCT 100P CSBGA T&R - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC LIU T1/E1/J1 SCT 100P CSBGA 制造商:Maxim Integrated Products 功能描述:Network Controller & Processor ICs T1/E1/J1 Transceiver
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*