參數資料
型號： DS21FT42N
廠商： DALLAS SEMICONDUCTOR
元件分類： Digital Transmission Controller
英文描述： DATACOM, FRAMER, PBGA300
封裝： 27 X 27 MM, BGA-300
文件頁數： 35/115頁
文件大?。?/td> 534K
代理商： DS21FT42N
DS21FF42/DS21FT42
26 of 115
Signal Name:
JTRST*
Signal Description:
IEEE 1149.1 Test Reset
Signal Type:
Input
This signal is used to asynchronously reset the test access port controller. At power up, JTRST* must be
set low and then high. This action will set the device into the DEVICE ID mode allowing normal device
operation. If boundary scan is not used and FMS = 0, this pin should be held low. This function is
available when FMS = 0. When FMS=1, this pin is held LOW internally. This pin is pulled up internally
by a 10K ohm resistor. FMS is tied to ground for the DS21FF42/DS21FT42.
Signal Name:
JTMS
Signal Description:
IEEE 1149.1 Test Mode Select
Signal Type:
Input
This pin is sampled on the rising edge of JTCLK and is used to place the test port into the various defined
IEEE 1149.1 states. This pin is pulled up internally by a 10K ohm resistor. If not used, this pin should
be left unconnected.
This function is available when FMS = 0.
FMS is tied to ground for the
DS21FF42/DS21FT42.
Signal Name:
JTCLK
Signal Description:
IEEE 1149.1 Test Clock Signal
Signal Type:
Input
This signal is used to shift data into JTDI pin on the rising edge and out of JTDO pin on the falling edge.
If not used, this pin should be connected to VSS. This function is available when FMS = 0. FMS is tied
to ground for the DS21FF42/DS21FT42.
Signal Name:
JTDI
Signal Description:
IEEE 1149.1 Test Data Input
Signal Type:
Input
Test instructions and data are clocked into this pin on the rising edge of JTCLK. This pin is pulled up
internally by a 10K ohm resistor. If not used, this pin should be left unconnected. This function is
available when FMS = 0. FMS is tied to ground for the DS21FF42/DS21FT42.
Signal Name:
JTDO
Signal Description:
IEEE 1149.1 Test Data Output
Signal Type:
Output
Test instructions and data are clocked out of this pin on the falling edge of JTCLK. If not used, this pin
should be left unconnected. This function is available when FMS = 0. FMS is tied to ground for the
DS21FF42/DS21FT42.
SUPPLY PINS
Signal Name:
VDD
Signal Description:
Positive Supply
Signal Type:
Supply
2.97 to 3.63 volts.
相關PDF資料
PDF描述
DS21FF42 DATACOM, FRAMER, PBGA300
DS21FF42N DATACOM, FRAMER, PBGA300
DS21FT44N DATACOM, FRAMER, PBGA300
DS21FT44 DATACOM, FRAMER, PBGA300
DS21Q352 DATACOM, PCM TRANSCEIVER, PBGA256
相關代理商/技術參數
參數描述
DS21FT44 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FT44+ 功能描述:網絡控制器與處理器 IC 4X3 E1 Framer E1 Framer E1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FT44N 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl E1/E1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FT44N+ 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl E1/E1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21Q348 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*