X2 X1 " />
參數資料
型號： DS2890P-000
廠商： Maxim Integrated Products
文件頁數： 3/27頁
文件大?。?/td> 0K
描述： IC POT DIGITAL 1-WIRE 100K 6TSOC
標準包裝： 120
接片： 256
電阻（歐姆）： 100k
電路數： 1
溫度系數： 標準值 800 ppm/°C
存儲器類型： 易失
接口： 1 線 串行
電源電壓： 2.8 V ~ 6 V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 6-LSOJ
供應商設備封裝： 6-TSOC
包裝： 管件
DS2890
11 of 27
FIGURE 13. 1-WIRE CRC GENERATOR
R
X2
X1
X0
X8
X7
X6
X5
X4
X3
8TH
STAGE
7TH
STAGE
6TH
STAGE
5TH
STAGE
4TH
STAGE
3RD
STAGE
2ND
STAGE
1ST
STAGE
S
INPUT DATA
Polynomial = X8 + X5 + X4 + 1
POTENTIOMETER FUNCTION COMMANDS
Once the bus master has completed a ROM command sequence, one of six DS2890 potentiometer
function commands can be issued. The Potentiometer Function Command flow charts, Figure 18 and
Figure 19, describe the protocols necessary for adjusting or reading the potentiometer wiper position or
controlling the operating state of the DS2890. All potentiometer functions consist of a single command
byte followed by one or more bytes of data or control written/read by the bus master. All data transferred
between the DS2890 and the bus master are communicated least significant bit first.
READ POSITION [F0H]
The Read Position command is used to obtain the wiper setting of the potentiometer currently addressed
by the Control Register. Although the DS2890 is a single element potentiometer, wiper addressing still
applies and the Control Register wiper number used for addressing must be set accordingly. In addition
to wiper position, the Control Register byte will be returned with a Read Position command. This enables
the bus master to easily confirm/determine the currently addressed potentiometer wiper. Following the
Read Position command byte, the bus master reads 16 bits to obtain first the Control Register byte then
the wiper position byte. The DS2890 will respond with 0’s to additional reads after the 8 bit of the
position byte. The Read Position command is terminated with a Reset pulse.
WRITE POSITION [0FH]
The Write Position command is used to set the position of the currently addressed potentiometer wiper.
Although the DS2890 is a single element potentiometer, wiper addressing still applies and the Control
Register wiper number used for addressing must be set accordingly. The bus master follows the Write
Position command byte with an 8-bit wiper position value. Following the 8th bit of the position byte, the
bus master reads back the 8-bit position value from the DS2890 to confirm that the value was received
correctly by the device. If an incorrect value is read back, the bus master must issue a Reset pulse and
repeat the sequence. If the value read back is correct, the bus master then sends the 8-bit release code
(96h). If the DS2890 accurately receives the release code, the wiper position is updated and the device
will respond with 0’s to additional reads by the bus master. If an invalid release code is received, no
change is made to the wiper position and the device will respond with 1’s to additional reads by the bus
master. The Write Position command is terminated with a Reset pulse.
相關PDF資料
PDF描述
VE-26H-MW-S CONVERTER MOD DC/DC 52V 100W
VE-264-MW-S CONVERTER MOD DC/DC 48V 100W
VE-262-MW-S CONVERTER MOD DC/DC 15V 100W
DS1844E-010 IC POT DIG QUAD 10K 20-TSSOP
74VHC153SJ MULTIPLEXER DUAL 4IN 16SOP
相關代理商/技術參數
參數描述
DS2890P-000+ 功能描述:IC POT DIGITAL 1-WIRE 100K 6TSOC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:32 電阻（歐姆）:50k 電路數:1 溫度系數:標準值 50 ppm/°C 存儲器類型:易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 細型，TSOT-23-6 供應商設備封裝:TSOT-23-6 包裝:帶卷 (TR)
DS2890P-000+T&R 制造商:Maxim Integrated Products 功能描述:IC POT DIGITAL 1-WIRE 100K 6TSOC
DS2890P-000+T&R 功能描述:IC POT DIGITAL 1-WIRE 100K 6TSOC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 接片:32 電阻（歐姆）:50k 電路數:1 溫度系數:標準值 50 ppm/°C 存儲器類型:易失 接口:3 線串行（芯片選擇，遞增，增/減） 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 細型，TSOT-23-6 供應商設備封裝:TSOT-23-6 包裝:帶卷 (TR)
DS2890T 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:1-Wire Digital Potentiometer
DS2890T-000 功能描述:數字電位計 IC RoHS:否 制造商:Maxim Integrated 電阻:200 Ohms 溫度系數:35 PPM / C 容差:25 % POT 數量:Dual 每 POT 分接頭:256 弧刷存儲器:Volatile 緩沖刷: 數字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作電源電壓:1.7 V to 5.5 V 電源電流:27 uA 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:TQFN-16 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*