DS3161/DS3162/DS3163/DS3164
Bit 7: Receive Alarm Indication on LOF Enable (RAILE) – When 0, an LOF condition does not affect the receive
alarm indication signal (RAI). When 1, an LOF condition will cause the transmit E3 A bit to be set to one if transmit
automatic RAI is enabled.
Bit 6: Receive Alarm Indication on LOS Disable (RAILD) – When 0, an LOS condition will cause the transmit E3
A bit to be set to one if transmit automatic RAI is enabled. When 1, an LOS condition does not affect the RAI
signal.
Bit 5: Receive Alarm Indication on OOF Disable (RAIOD) – When 0, an OOF condition will cause the transmit
E3 A bit to be set to one if transmit automatic RAI is enabled. When 1, an OOF condition does not affect the RAI
signal.
Bit 4: Receive Alarm Indication on AIS Disable (RAIAD) – When 0, an AIS condition will cause the transmit E3
A bit to be set to one if transmit automatic RAI is enabled. When 1, an AIS condition does not affect the RAI signal.
Bit 3: Receive Overhead Masking Disable (ROMD) – When 0, the E3 overhead positions in the outgoing E3
payload will be marked as overhead by RDENn. When 1, the E3 overhead positions in the outgoing E3 payload will
be marked as data by RDENn.
Bits 2 to 1: LOF Integration Period (LIP[1:0]) – These two bits determine the OOF integration period for
declaring LOF.
00 = OOF is integrated for 3 ms before declaring LOF
01 = OOF is integrated for 2 ms before declaring LOF.
10 = OOF is integrated for 1 ms before declaring LOF
11 = LOF is declared at the same time as OOF
Bit 0: Force Framer Resynchronization (FRSYNC) – A 0 to 1 transition forces an OOF condition at the FAS
check. This bit must be cleared and set to one again to force another resynchronization
Register Name:
E3G751.RSR1
Register Description:
E3 G.751 Receive Status Register #1
Register Address:
(1,3,5,7)24h
Bit #
15
14
13
12
11
10
9
8
Name
Reserved
--
Reserved
RUA1
Bit #
7
6
5
4
3
2
1
0
Name
RAB
RNB
--
LOF
RDI
AIS
OOF
LOS
Bit 8: Receive Unframed All 1’s (RUA1) – When 0, the receive frame processor is not in a receive unframed all
1’s (RUA1) condition. When 1, the receive frame processor is in an RUA1 condition.
Bit 7: Receive A Bit (RAB) – This bit is the integrated A bit extracted from the E3 frame.
Bit 6: Receive N Bit (RNB) – This bit is the integrated N bit extracted from the E3 frame.
Bit 4: Loss Of Frame (LOF) – When 0, the receive frame processor is not in a loss of frame (LOF) condition.
When 1, the receive frame processor is in an LOF condition.
Bit 3: Remote Alarm Indication (RDI) – This bit indicates the current state of the remote alarm indication (RDI).
Bit 2: Alarm Indication Signal (AIS) – When 0, the receive frame processor is not in an alarm indication signal
(AIS) condition. When 1, the receive frame processor is in an AIS condition.
Bit 1: Out Of Frame (OOF) – When 0, the receive frame processor is not in an out of frame (OOF) condition.
When 1, the receive frame processor is in an OOF condition.
Bit 0: Loss Of Signal (LOS) – When 0, the receive loss of signal (LOS) input (RLOS) is low. When 1, RLOS is
high.