DS33Z44DK
10 of 59
PC BOARD ERRATA
Silk screen for the serial resource card has VCC and ground indicators pointing the wrong direction for
configuration switches SW27, SW28, and SW32. This should be corrected with an adhesive label.
Signal descriptions for JTAG connector are incorrect on the Quad T1E1 card. This should be corrected with an
adhesive label.
In the PCB layout the transformer TX primary is on the wrong side (creating a 2:1 winding instead of a 1:2).
This has been corrected in the schematic, the PCB / assembly has been modified to correct this.
FILE LOCATIONS
This design kit relies upon several supporting files, which are provided on the CD and are available as a zip file
All locations are given relative to the top directory of the CD/zip file.
DS33Z44 register definition files and configuration files:
o
.\cfg_demo_gui\DS33Z44_cfg_demo_gui\DS33Z44.def
o
.\DS33Z44_cfg_demo_gui\SU_LI_PORT4.def (def files for port 3, 2, 1 not shown)
o
.\DS33Z44_cfg_demo_gui\basic_config.mfg
DS21458 register definition files and configuration files:
o
.\DS33Z44_cfg_demo_gui\Qt1e1_DS21458\DS21458RC.def
o
.\DS33Z44_cfg_demo_gui\Qt1e1_DS21458\DS21458RC_FPGA.def
o
.\DS33Z44_cfg_demo_gui\Qt1e1_DS21458\e1_gapclk_crc4_hdb3_nocas.ini
o
.\DS33Z44_cfg_demo_gui\Qt1e1_DS21458\gapclk_DS21458_T1_ESF_LBO0.ini
DS3174 register definition files and configuration files:
o
.\DS33Z44_cfg_demo_gui\Qt3e3_DS3184\ds3184_evbrd_reduced.def
o
….. 14 other low level def files ….
o
.\DS33Z44_cfg_demo_gui\Qt3e3_DS3184\84_t3_sct_needscoaxlb.mfg