- 您現在的位置：買賣IC網 > PDF目錄370575 > HFBR-5207 622 Mbps Multimode Fiber Transceiver for ATM,SONET STS-12/SDH STM-4(應用于 ATM,SONET STS-12/SDH STM-4的622 Mbps多模式光收發器) PDF資料下載
參數資料
| 型號： | HFBR-5207 |
| 英文描述： | 622 Mbps Multimode Fiber Transceiver for ATM,SONET STS-12/SDH STM-4(應用于 ATM,SONET STS-12/SDH STM-4的622 Mbps多模式光收發器) |
| 中文描述： | 622 Mbps的多模光纖收發器（應用于自動取款機，SONET的STS-12/SDH的STM - 4的622對ATM，SONET的STS-12/SDH的STM - 4 Mbps的多模式光收發器） |
| 文件頁數： | 14/16頁 |
| 文件大?。?/td> | 102K |
| 代理商： | HFBR-5207 |
14
Table 1. Pin Out Table
(continued)
Pin
4
Symbol
Clk+
Functional Description
Received Recovered Clock Out
See pins 1 & 2 for optional, local generated clock output.
The falling edge occurs coincident with the edges of the Received Data output.
The rising edge occurs in the middle of the Received Data baud period.
Terminate this high-speed, complementary, differential clock output with standard PECL
techniques at the clock input point of the follow-on device.
If this clock output is not used, leave it open-circuited with no printed circuit board trace
attached to this output pin.
Pins 5 through 9 are not connected to the transceiver internal circuit. They are reserved
for use with the complementary Hewlett-Packard CDX2622 single mode fiber-optic
transceiver which is provided in the same 2 x 9 package style. See the Hewlett-Packard
CDX2622 data sheet for full details on the use of these pins.
5
6
7
8
9
10
NIC
NIC
NIC
NIC
NIC
Veet
Transmitter Signal Ground
Directly connect this pin to the transmitter signal ground plane.
Transmitter Data In
Terminate this high-speed, differential Transmitter Data Bar input with standard PECL
techniques at the transmitter input pin.
Transmitter Data In Bar
Terminate this high-speed, differential Transmitter Data input with standard PECL
techniques at the transmitter input pin.
Transmitter Power Supply
Provide + 5 Vdc via the recommended transmitter power supply filter circuit. Locate
the power supply filter circuit as close as possible to the V
CCT
pin.
Receiver Power Supply
Provide + 5 Vdc via the recommended receiver power supply filter circuit. Locate the
power supply filter circuit as close as possible to the V
CCR
pin.
Signal Detect
Normal input optical power levels to the receiver result in a logic “1” output (Asserted).
Low input optical power levels to the receiver result in a fault indication shown by
a logic “0” output (De-asserted).
11
TD+
12
TD-
13
V
CCT
14
V
CCR
15
SD
Signal Detect is a single-ended, low-power, PECL output. Since SD is a low-power PECL
output, complete the interconnection of SD output with other PECL inputs using a 10 k
pull-down resistor to V
EE
to allow biasing of this interconnection. Do not load this SD
output with standard PECL, 50
to Vcc-2V, termination. If Signal Detect output is not
used, leave it open-circuited.
This Signal Detect output can be used to drive a PECL input on an upstream circuit,
such as, Signal Detect input, Loss of Signal-bar input, or to optionally drive the Lock-
to-Reference-bar input (pin 2) of this transceiver.
相關PDF資料 |
PDF描述 |
|---|---|
| HFBR-5208M | 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications(應用于622 Mb/s ATM/SONET/SDH 的1 x 9光纖收發器) |
| HFCT-5208M | 1 x 9 Fiber Optic Transceivers for 622 Mb/s ATM/SONET/SDH Applications(應用于622 Mb/s ATM/SONET/SDH 的1 x 9光纖收發器) |
| HFBR-5208 | 1300 nm LED Transceiver for ATM, SONET/SDH 622 Mb/s and General Purpose 155 - 650 Mb/s(應用于ATM, SONET/SDH 622 Mb/s和 通用155 - 650 Mb/s的1300 nm LED收發器) |
| HFBR-5303 | 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器) |
| HFBR-53D3 | 850 nm VCSEL 1x9 Transceiver(850 nm VCSEL 1x9 收發器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFBR-5208 | 功能描述:光纖發射器、接收器、收發器 622Mbps ATM MMF 1x9 Trxcvr RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFBR-5208AEM | 功能描述:光纖發射器、接收器、收發器 1x9 622Mb/s SR ExtTe mp Txcvr Metal RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFBR-5208AEMZ | 功能描述:光纖發射器、接收器、收發器 1x9 622Mb/s SR ExTp Txc Metal RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFBR-5208AFM | 功能描述:光纖發射器、接收器、收發器 1x9 622Mb/s SR ExtTe mp Txcvr Metal RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFBR-5208AFMZ | 功能描述:光纖發射器、接收器、收發器 1x9 622Mb/s SR ExTp Txc Metal RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
發布緊急采購，3分鐘左右您將得到回復。