- 您現在的位置：買賣IC網 > PDF目錄10035 > IDT72V3612L20PF8 (IDT, Integrated Device Technology Inc)IC FIFO 64X36X2 20NS 120QFP PDF資料下載
參數資料
| 型號： | IDT72V3612L20PF8 |
| 廠商： | IDT, Integrated Device Technology Inc |
| 文件頁數： | 19/24頁 |
| 文件大小： | 0K |
| 描述： | IC FIFO 64X36X2 20NS 120QFP |
| 標準包裝： | 750 |
| 系列： | 72V |
| 功能： | 異步 |
| 存儲容量： | 4.6K（64 x 36 x2） |
| 數據速率： | 50MHz |
| 訪問時間： | 20ns |
| 電源電壓： | 3 V ~ 3.6 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 120-LQFP |
| 供應商設備封裝： | 120-TQFP（14x14） |
| 包裝： | 帶卷 (TR) |
| 其它名稱： | 72V3612L20PF8 |
4
IDT72V3612 3.3V, CMOS SyncBiFIFOTM
64 x 36 x 2
COMMERCIALTEMPERATURERANGE
PIN DESCRIPTION (CONTINUED)
Symbol
Name
I/O
Description
MBF2
Mail2 Register Flag
O
MBF2 is set LOW by a LOW-to-HIGH transition of CLKB that writes data to the mail2 register.
Writes to the mail2 register are inhibited while MBF2 is set LOW. MBF2 is set HIGH by a LOW-to-
HIGH transition of CLKA when a port A read is selected and MBA is HIGH. MBF2 is set HIGH
when the device is reset.
ODD/
Odd/Even Parity
I
Odd parity is checked on each port when ODD/EVEN is HIGH, and even parity is checked when
EVEN
Select
ODD/EVEN is LOW. ODD/EVEN also selects the type of parity generated for each port if parity
generation is enabled for a read operation.
PEFA
Port A Parity Error
O
When any byte applied to terminals A0-A35 fails parity, PEFA is LOW. Bytes are organized as
Flag
(Port A)
A0-A8, A9-A17, A18-A26, and A27-A35, with the most significant bit of each byte serving as the
parity bit. The type of parity checked is determined by the state of the ODD/EVEN input. The
parity trees used to check the A0-A35 inputs are shared by the mail2 register to generate parity if
parity generation is selected by PGA. Therefore, if a mail2 read with parity generation is setup by
having W/RA LOW, MBA HIGH, and PGA HIGH, the PEFA flag is forced HIGH regardless of the
A0-A35 inputs.
PEFB
Port B Parity Error
O
When any byte applied to terminals B0-B35 fails parity, PEFB is LOW. Bytes are organized as
Flag
(Port B)
B0-B8, B9-B17, B18-B26, B27-B35 with the most significant bit of each byte serving as the parity
bit. The type of parity checked is determined by the state of the ODD/EVEN input. The parity trees
used to check the B0-B35 inputs are shared by the mail1 register to generate parity if parity
generation is selected by PGB. Therefore, if a mail1 read with parity generation is setup by having
W/RB LOW, MBB HIGH, and PGB HIGH, the PEFB flag is forced HIGH regardless of the state of
the B0-B35 inputs.
PGA
Port A Parity
I
Parity is generated for data reads from port A when PGA is HIGH. The type of parity generated is
Generation
selected by the state of the ODD/EVEN input. Bytes are organized as A0-A8, A9-A17, A18-A26,
and A27-A35. The generated parity bits are output in the most significant bit of each byte.
PGB
Port B Parity
I
Parity is generated for data reads from port B when PGB is HIGH. The type of parity generated is
Generation
selected by the state of the ODD/EVEN input. Bytes are organized as B0-B8, B9-B17, B18-B26,
and B27-B35. The generated parity bits are output in the most significant bit of each byte.
RST
Reset
I
To reset the device, four LOW-to-HIGH transitions of CLKA and four LOW-to-HIGH transitions of
CLKB must occur while RST is LOW. This sets the AFA, AFB, MBF1, and MBF2 flags HIGH and
the EFA, EFB, AEA, AEB, FFA, and FFB flags LOW. The LOW-to-HIGH transition of RST latches
the status of the FS1 and FS0 inputs to select Almost-Full and Almost-Empty flag offset.
W/RA
Port A Write/Read
I
A HIGH selects a write operation and a LOW selects a read operation on port A for a LOW-to-
Select
HIGH transition of CLKA. The A0-A35 outputs are in the high-impedance state when W/RA is
HIGH.
W/RB
Port B Write/Read
I
A HIGH selects a write operation and a LOW selects a read operation on port B for a LOW-to-
Select
HIGH transition of CLKB. The B0-B35 outputs are in the high-impedance state when W/RB is
HIGH.
相關PDF資料 |
PDF描述 |
|---|---|
| LT1794CSW#TRPBF | IC OPAMP 200MHZ DUAL 20-SOIC |
| VI-J0K-MX-S | CONVERTER MOD DC/DC 40V 75W |
| VI-BTR-MY | CONVERTER MOD DC/DC 7.5V 50W |
| LTC486ISW#PBF | IC DVR RS485 LOW PWR QUAD 16SOIC |
| LTC2285CUP#TRPBF | IC ADC DUAL 14BIT 125MSPS 64QFN |
相關代理商/技術參數 |
參數描述 |
|---|---|
| IDT72V3612L20PQF | 功能描述:IC FIFO 64X36X2 20NS 132QFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3613L12PF | 功能描述:IC FIFO CLOCK 64X36 12NS 120TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3613L12PF8 | 功能描述:IC FIFO CLOCK 64X36 12NS 120TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3613L12PQF | 功能描述:IC FIFO CLOCK 64X36 12NS 132PQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
| IDT72V3613L15PF | 功能描述:IC FIFO CLOCK 64X36 15NS 120TQFP RoHS:否 類別:集成電路 (IC) >> 邏輯 - FIFO 系列:72V 標準包裝:90 系列:7200 功能:同步 存儲容量:288K（16K x 18） 數據速率:100MHz 訪問時間:10ns 電源電壓:4.5 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:64-LQFP 供應商設備封裝:64-TQFP（14x14） 包裝:托盤 其它名稱:72271LA10PF |
發布緊急采購，3分鐘左右您將得到回復。