參數資料
型號: IDT82P2521BH
廠商: IDT, Integrated Device Technology Inc
文件頁數: 114/147頁
文件大?。?/td> 0K
描述: IC LIU E1 21+1CH SHORT 640-PBGA
標準包裝: 5
類型: 線路接口裝置(LIU)
規程: E1
電源電壓: 3.135 V ~ 3.465 V
安裝類型: 表面貼裝
封裝/外殼: 640-BGA 裸露焊盤
供應商設備封裝: 640-PBGA-EP(31x31)
包裝: 托盤
其它名稱: 82P2521BH
IDT82P2521
21(+1) CHANNEL HIGH-DENSITY E1 LINE INTERFACE UNIT
Miscellaneous
69
December 7, 2005
4.1.1
POWER-ON RESET
Power-on reset is initiated during power-up. When all VDD inputs
(1.8V and 3.3V) reach approximately 60% of the standard value of VDD,
power-on reset begins. If MCLK is applied, power-on reset will complete
within 1 ms maximum; if MCLK is not applied, the device remains in
reset state.
4.1.2
HARDWARE RESET
Pulling the RST pin to low will initiate hardware reset. The reset cycle
should be more than 1 s. If the RST pin is held low continuously, the
device remains in reset state.
4.1.3
GLOBAL SOFTWARE RESET
Writing the RST register will initiate global software reset. Once initi-
ated, global software reset completes in 1 s maximum.
4.1.4
PER-CHANNEL SOFTWARE RESET
Writing a ‘1’ to the CHRST bit (b1, CHCF,...) will initiate per-channel
software reset. Once initiated, per-channel software reset completes in 1
s maximum and the CHRST bit (b1, CHCF,...) is self cleared.
This reset is different from other resets, for:
It does not reset the global registers, state machines and common
pins (including the pins of clock generator, microprocessor inter-
face and JTAG interface);
It does not reset the other channels.
4.2
MICROPROCESSOR INTERFACE
The microprocessor interface provides access to read and write the
registers in the device. The interface consists of:
Serial microprocessor interface;
Parallel Motorola Non-Multiplexed microprocessor interface;
Parallel Motorola Multiplexed microprocessor interface;
Parallel Intel Non-Multiplexed microprocessor interface;
Parallel Intel Multiplexed microprocessor interface.
The microprocessor interface is selected by the P/S, INT/MOT and
IM pins, as shown in Table-18. The interfaced pins in different interfaces
face Timing for the timing characteristics.
Table-18 Microprocessor Interface
P/S
INT/MOT
IM
Microprocessor Interface
Interfaced Pins
GNDD
Open
GNDD
Serial microprocessor interface
CS
, SCLK, SDI, SDO
VDDIO
GNDD
Parallel Motorola Non-Multiplexed microprocessor interface
CS
, DS, R/W, ACK, D[7:0], A[10:0]
Open
Parallel Motorola Multiplexed microprocessor interface
CS
, AS, DS, R/W, ACK, D[7:0], A[10:8]
Open
GNDD
Parallel Intel Non-Multiplexed microprocessor interface
CS
, RD, WR, RDY, D[7:0], A[10:0]
Open
Parallel Intel Multiplexed microprocessor interface
CS
, ALE, RD, WR, RDY, D[7:0], A[10:8]
相關PDF資料
PDF描述
IDT72V3652L15PQF IC BI FIFO 4096X36 15NS 132QFP
V48B12M250B3 CONVERTER MOD DC/DC 12V 250W
V48B12M250B2 CONVERTER MOD DC/DC 12V 250W
IDT72V3652L15PF IC BI FIFO 4096X36 15NS 120QFP
IDT82V2088DR IC LIU T1/J1/E1 8CH 208-TQFP
相關代理商/技術參數
參數描述
IDT82P2521BHBLANK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:21(1) Channel High-Density E1 Line Interface Unit
IDT82P2521BHG 功能描述:IC LIU E1 21+1CH SHORT 640-PBGA RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
IDT82P2521BHGBLANK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:21(1) Channel High-Density E1 Line Interface Unit
IDT82P2808 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:8(+1) Channel High-Density T1/E1/J1 Line Interface Unit
IDT82P2808BB 功能描述:IC LIU T1/J1/E1 8+1CH 416-PBGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:1,000 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-SOIC(0.295",7.50mm 寬) 供應商設備封裝:16-SOIC 包裝:帶卷 (TR)