參數資料
型號： IDT82V3001A
廠商： Integrated Device Technology, Inc.
英文描述： WAN PLL WITH SINGLE REFERENCE INPUT
中文描述： 廣域網鎖相環單參考輸入
文件頁數： 14/27頁
文件大?。?/td> 345K
代理商： IDT82V3001A
14
IDT82V3001A WAN PLL WITH SINGLE REFERENCE INPUT INDUSTRIAL TEMPERATURE RANGE
Figure - 8 DPLL Block Diagram
3.5.1
PHASE DETECTOR (PHD)
In Normal Mode, the Phase Detector compares the virtual reference
signal from the TIE Control Circuit with the feedback signal from the
Frequency Select Circuit, and outputs an error signal corresponding to
the phase difference between the two. This error signal is then sent to
the Limiter circuit for phase slope control.
The feedback signal can be 8 kHz, 2.048 MHz or 1.544 MHz, as
selected by F_sel1 and F_sel0 pins. Refer to
Table - 3
for details.
In Freerun or Holdover Mode, the Frequency Select Circuit, the
Phase Detector and the Limiter are not active and the input reference
signal is not used.
3.5.2
LIMITER
The Limiter is used to ensure that the DPLL responds to all input
transient conditions with a maximum output phase slope of 5 ns per 125
μs. This well meets AT&T TR62411 and Telcordia GR-1244-CORE
specifications, which specify the maximum phase slope of 7.6 ns per
125 μs and 81 ns per 1.326 ms respectively.
In Normal Mode, the Limiter receives the error signal from the Phase
Detector, limits the phase slope within 5 ns per 125 μs and sends the
limited signal to the Loop Filter.
The fast lock mode is a submode of Normal Mode. By setting the
FLOCK pin to high, the device will enter fast lock mode. In this mode,
the Limiter is disabled and the DPLL will lock to the incoming reference
within 500 ms.
3.5.3
LOOP FILTER
The Loop Filter ensures that the jitter transfer meets ETS 300 011
and AT&T TR62411 requirements. This Loop Filter works similarly to a
first order low pass filter with 2.1 Hz cutoff frequency for the three valid
input reference signals (8 kHz, 2.048 MHz or 1.544 MHz).
The output of the Loop Filter goes to the Digital Control Oscillator
directly or via the Fraction blocks, in which E1, T1 and C6 signals are
generated.
3.5.4
FRACTION BLOCK
By applying some algorithms to the incoming E1 signal, the
Fraction_C6 and Fraction_T1 blocks generate C6 and T1 signals
respectively.
3.5.5
DIGITAL CONTROL OSCILLATOR (DCO)
In Normal Mode, the DCO receives three limited and filtered signals
from Loop Filter or Fraction blocks. Based on the received signals, the
DCO generates three digital outputs, 25.248 MHz, 32.768 MHz and
D
C32o
F0o
F8o
F16o
F32o
C16o
C8o
C4o
C2o
C3o
C6o
RSP
TSP
C1.5o
Output Interface
T1_Divider
E1_Divider
C6_Divider
Frequency
Selection
Circuit
Phase
Detector
Virtual Reference
Loop Filter
Fraction_C6
Fraction_T1
24.704 MHz
32.768 MHz
25.248 MHz
Feedback
Signal
Limiter
FLOCK
F_sel1 F_sel0
相關PDF資料
PDF描述
IDT82V3001APV WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3002A WAN PLL WITH DUAL REFERENCE INPUTS
IDT82V3002APV WAN PLL WITH DUAL REFERENCE INPUTS
IDT82V3010 T1/E1/OC3 TELECOM CLOCK GENERATOR WITH DUAL REFERENCE INPUTS
IDT82V3010PV T1/E1/OC3 TELECOM CLOCK GENERATOR WITH DUAL REFERENCE INPUTS
相關代理商/技術參數
參數描述
IDT82V3001A_08 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001APV 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001APVG 功能描述:IC PLL WAN W/SGL REF INP 56SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1 系列:- 類型:時鐘/頻率發生器，多路復用器 PLL:是 主要目的:存儲器，RDRAM 輸入:晶體 輸出:LVCMOS 電路數:1 比率 - 輸入:輸出:1:2 差分 - 輸入:輸出:無/是 頻率 - 最大:400MHz 電源電壓:3 V ~ 3.6 V 工作溫度:0°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:Digi-Reel® 其它名稱:296-6719-6
IDT82V3001APVG8 功能描述:IC PLL WAN W/SGL REF INP 56-SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1,500 系列:- 類型:時鐘緩沖器/驅動器 PLL:是 主要目的:- 輸入:- 輸出:- 電路數:- 比率 - 輸入:輸出:- 差分 - 輸入:輸出:- 頻率 - 最大:- 電源電壓:3.3V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:帶卷 (TR) 其它名稱:93786AFT
IDT82V3002A 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH DUAL REFERENCE INPUTS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*