4
FN6661.2
March 18, 2010
Absolute Maximum Ratings
Thermal Information
VDD to GND. . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 5.5V
Input Voltages
D+, D-, L, R (Note 6). . . . . . . . . . . -2V to ((VDD) + 0.3V) VBUS (Note 6) . . . . . . . . . . . . . . . . . . . . . . . -2V to 5.5V CTRL (Note 6) . . . . . . . . . . . . . . -0.3V to ((VDD) + 0.3V) Output Voltages
COM-, COM+ (Note 6) . . . . . . . . . . -2V to ((VDD) + 0.3V) Continuous Current (Audio Switches) . . . . . . . . . . ±150mA
Peak Current (Audio Switches)
(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . ±300mA
Continuous Current (USB Switches) . . . . . . . . . . . . ±40mA
Peak Current (USB Switches)
(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . ±100mA
ESD Rating:
Human Body Model, COM Pins. . . . . . . . . . . . . . . . . >6kV
Human Body Model, All Pins . . . . . . . . . . . . . . . . . . >4kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . >300V
Charged Device Model . . . . . . . . . . . . . . . . . . . . .>1.5kV
Latch-up Tested per JEDEC; Class II Level A . . . . . at +85°C
Thermal Resistance (Typical)
θJA (°C/W) θJC (°C/W)
10 Ld TQFN Package (Notes
8, 10)160
105
10 Ld 3x3 TDFN Package (Notes
7, 9)55
18
Maximum Junction Temperature (Plastic Package). . +150°C
Maximum Storage Temperature Range. . . . . -65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . -40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTES:
6. Signals on D+, D-, L, R, COM-, COM+, CTRL, VBUS exceeding VDD or GND by specified amount are clamped. Limit current to
maximum current ratings.
7. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach”
features. See Tech Brief TB379.
8. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief
TB379 for details.
9. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
10. For θJC, the “case temp” location is taken at the package top center.
Electrical Specifications - 2.7V to 3.6V Supply Test Conditions: VDD = +3.0V, GND = 0V, VBUSH = 3.8V, VBUSL = 3.2V,
V
CTRLH =1.4V, VCTRLL = 0.5V, (Note 11), Unless Otherwise Specified. Boldface limits apply over the operating temperature range,
-40°C to +85°C.
PARAMETER
TEST CONDITIONS
TEMP
(°C)
MIN
TYP
MAX
ANALOG SWITCH CHARACTERISTICS
Audio Switches (L, R)
Analog Signal Range,
VANALOG
VDD = 2.7V to 3.6V, VBUS = float,
CTRL = 1.4V
Full
-1.5
-
1.5
V
ON-Resistance, rON
VDD = 3.0V, VBUS = 3.2V,
CTRL = 1.4V, ICOMx =40mA, VL or
VR = -0.85V to 0.85V
+25
-
2.4
2.8
Ω
Full
-
3.8
Ω
rON Matching Between
Channels, ΔrON
VDD = 3.0V, VBUS = 3.2V,
CTRL = 1.4V, ICOMx =40mA, VL or
VR = Voltage at max rON over signal
range of -0.85V to 0.85V
+25
-
0.1
0.32
Ω
Full
-
0.4
Ω
rON Flatness, RFLAT(ON)
VDD = 3.0V, VBUS = 3.2V,
CTRL = 1.4V, ICOMx =40mA, VL or
VR = -0.85V to 0.85V, (Notes 14, 15) +25
-
0.02
0.06
Ω
Full
-
0.07
Ω
Insertion Loss, GON
VDD = 3.0V, VBUS = 0V, CTRL = VDD,
RLOAD =32Ω
+25
-
-0.78
-
dB
Insertion Loss, GON
VDD = 3.0V, VBUS = 0V, CTRL = VDD,
RLOAD =15Ω
+25
-
-1.5
-
dB
ISL54210