參數資料
型號： ISP1160
廠商： NXP Semiconductors N.V.
英文描述： Embedded Universal Serial Bus Host Controller
中文描述： 嵌入式通用串行總線主控制器
文件頁數： 69/88頁
文件大?。?/td> 2044K
代理商： ISP1160
Philips Semiconductors
ISP1160
Embedded USB Host Controller
Product data
Rev. 04 — 04 July 2003
69 of 88
9397 750 11371
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
11. Power supply
The ISP1160 can operate at either 5 V or 3.3 V.
When using 5 V as the ISP1160’s power supply input, only V
CC
(pin 56) can be
connected to the 5 V power supply. An application with a 5 V power supply input is
shown in
Figure 29
. The ISP1160 has an internal DC/DC regulator to provide 3.3 V
for its internal core. This internal 3.3 V can also be obtained from V
REG(3V3)
(pin 58).
When using 3.3 V as the power supply input, the internal DC/DC regulator will be
bypassed. All four power supply pins (V
CC
, V
REG(3V3)
, V
HOLD1
and V
HOLD2
) can be
used as power supply input.
It is recommended that you connect all four power supply pins to the 3.3 V power
supply, as shown in
Figure 30
. If, however, you have board space (routing area)
constraints, you must connect at least V
CC
and V
REG(3V3)
to the 3.3 V power supply.
For both 3.3 V and 5 V operation, all four power supply pins should be connected to a
decoupling capacitor.
12. Crystal oscillator
The ISP1160 has a crystal oscillator designed for a 6 MHz parallel-resonant crystal
(fundamental). A typical circuit is shown in
Figure 31
. Alternatively, an external clock
signal of 6 MHz can be applied to input XTAL1, while leaving output XTAL2 open. See
Figure 32
. The 6 MHz oscillator frequency is multiplied to 48 MHz by an internal PLL.
Fig 29. Using a 5 V supply.
Fig 30. Using a 3.3 V supply.
004aaa068
GND
VCC
VREG(3V3)
VHOLD1
VHOLD2
+
5 V
ISP1160
004aaa069
GND
VCC
VREG(3V3)
VHOLD1
VHOLD2
+
3.3 V
ISP1160
Fig 31. Oscillator circuit with external crystal.
Fig 32. Oscillator circuit using external oscillator.
18 pF
6 MHz
18 pF
004aaa070
XTAL2
XTAL1
ISP1160
OSC
Out
n.c.
6 MHz
004aaa071
XTAL2
XTAL1
ISP1160
VCC
相關PDF資料
PDF描述
ISP1160BD Embedded Universal Serial Bus Host Controller
ISP1160BM Embedded Universal Serial Bus Host Controller
ISP1161A Full-speed Universal Serial Bus single-chip host and device controller
ISP1161ABD Full-speed Universal Serial Bus single-chip host and device controller
ISP1161ABM Full-speed Universal Serial Bus single-chip host and device controller
相關代理商/技術參數
參數描述
ISP1160BD 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller
ISP1160BD,157 功能描述:USB 接口集成電路 USB 1.1 HOST CONTROLLER RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD/01 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller
ISP1160BD/01,118 功能描述:USB 接口集成電路 USB HOST CTRL RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD/01,151 功能描述:USB 接口集成電路 USB FULL SPEED HOST RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*