參數資料
型號: ISP1160BD/01,151
廠商: ST-ERICSSON
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封裝: 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數: 55/88頁
文件大?。?/td> 394K
代理商: ISP1160BD/01,151
Philips Semiconductors
ISP1160
Embedded USB Host Controller
Product data
Rev. 05 — 24 December 2004
59 of 88
9397 750 13963
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
10.4.3
HcTransferCounter register (R/W: 22H/A2H)
This register holds the number of bytes of a PIO or DMA transfer. For a PIO transfer,
the number of bytes being read or written to the Isochronous Transfer List (ITL) or
Acknowledged Transfer List (ATL) buffer RAM must be written into this register. For a
DMA transfer, the number of bytes must be written into this register as well. However,
for this counter to be read into the DMA counter, the HCD must set bit 2
(DMACounterSelect) of the HcDMAConguration register. The counter value for ATL
must not be greater than 1000H, and for ITL it must not be greater than 800H. When
the byte count of the data transfer reaches this value, the HC will generate an internal
EOT signal to set bit 2 (AllEOTInterrupt) of the Hc
PInterrupt register, and also
update the HcBufferStatus register.
Code (Hex): 22 — read
Code (Hex): A2 — write
10.4.4
Hc
PInterrupt register (R/W: 24H/A4H)
All the bits in this register will be active on power-on reset. However, none of the
active bits will cause an interrupt on the interrupt pin (INT) unless they are set by the
respective bits in the Hc
PInterruptEnable register, and together with bit 0 of the
HcHardwareConguration register.
2
DMACounter
Select
0 — DMA counter not used. External EOT must be used
1 — enables the DMA counter for DMA transfer.
HcTransferCounter register must be lled with non-zero values for
DREQ to be raised after bit DMA Enable is set.
1
ITL_ATL_
DataSelect
0 — ITL buffer RAM selected for ITL data
1 — ATL buffer RAM selected for ATL data
0
DMARead
WriteSelect
0 — read from the HC FIFO buffer RAM
1 — write to the HC FIFO buffer RAM
Table 39:
HcDMAConguration register: bit description…continued
Bit
Symbol
Description
Table 40:
HcTransferCounter register: bit allocation
Bit
15
14
13
12
11
10
9
8
Symbol
Counter value
Reset
00000000
Access
R/W
Bit
7
6
5
4
3
2
1
0
Symbol
Counter value
Reset
00000000
Access
R/W
Table 41:
HcTransferCounter register: bit description
Bit
Symbol
Description
15 to 0
Counter
value
The number of data bytes to be read to or written from RAM.
相關PDF資料
PDF描述
ISP1161A1BM,557 UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
ISP1181BBS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BBS,518 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BDGG,112 UNIVERSAL SERIAL BUS CONTROLLER, PDSO48
ISP1183BS,157 UNIVERSAL SERIAL BUS CONTROLLER, PQCC32
相關代理商/技術參數
參數描述
ISP1160BD01FA 功能描述:IC USB HOST CONTROLLER 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1160BD01-S 功能描述:USB 接口集成電路 USB FULL SPEED HOST RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01-T 功能描述:USB 接口集成電路 USB HOST CTRL FULL-SPD RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01TM 功能描述:IC USB HOST CTRL FULL-SPD 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1160BM 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller