參數資料
型號: ISP1160BD/01,151
廠商: ST-ERICSSON
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封裝: 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數: 85/88頁
文件大?。?/td> 394K
代理商: ISP1160BD/01,151
Philips Semiconductors
ISP1160
Embedded USB Host Controller
Product data
Rev. 05 — 24 December 2004
86 of 88
9397 750 13963
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
[3]
These transparent plastic packages are extremely sensitive to reow soldering conditions and must
on no account be processed through more than one soldering cycle or subjected to infrared reow
soldering with peak temperature exceeding 217
°C ± 10 °C measured in the atmosphere of the reow
oven. The package body peak temperature must be kept as low as possible.
[4]
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom
side, the solder cannot penetrate between the printed-circuit board and the heatsink. On versions with
the heatsink on the top side, the solder might be deposited on the heatsink surface.
[5]
If wave soldering is considered, then the package must be placed at a 45
° angle to the solder wave
direction. The package footprint must incorporate solder thieves downstream and at the side corners.
[6]
Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it
is denitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
[7]
Wave soldering is suitable for SSOP, TSSOP, VSO and VSOP packages with a pitch (e) equal to or
larger than 0.65 mm; it is denitely not suitable for packages with a pitch (e) equal to or smaller than
0.5 mm.
[8]
Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered
pre-mounted on ex foil. However, the image sensor package can be mounted by the client on a ex
foil by using a hot bar soldering process. The appropriate soldering prole can be provided on
request.
[9]
Hot bar soldering or manual soldering is suitable for PMFP packages.
22. Revision history
Table 77:
Revision history
Rev Date
CPCN
Description
05
20041224 200412019
Product data (9397 750 13963)
Modications:
Table 2 “Pin description LQFP64”: in the description for pin 60, changed address A1 to
A2.
sentence, changed source to drain and drain to source.
04
20030704 -
Product data (9397 750 11371)
03
20030227 -
Product data (9397 750 10765)
02
20020912 -
Product data (9397 750 09628)
01
20020104 -
Objective data (9397 750 09161)
相關PDF資料
PDF描述
ISP1161A1BM,557 UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
ISP1181BBS,551 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BBS,518 UNIVERSAL SERIAL BUS CONTROLLER, PQCC48
ISP1181BDGG,112 UNIVERSAL SERIAL BUS CONTROLLER, PDSO48
ISP1183BS,157 UNIVERSAL SERIAL BUS CONTROLLER, PQCC32
相關代理商/技術參數
參數描述
ISP1160BD01FA 功能描述:IC USB HOST CONTROLLER 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1160BD01-S 功能描述:USB 接口集成電路 USB FULL SPEED HOST RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01-T 功能描述:USB 接口集成電路 USB HOST CTRL FULL-SPD RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BD01TM 功能描述:IC USB HOST CTRL FULL-SPD 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1160BM 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller