參數資料
型號： ISP1161ABD
廠商： NXP SEMICONDUCTORS
元件分類： 總線控制器
英文描述： Full-speed Universal Serial Bus single-chip host and device controller
中文描述： UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封裝： 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數： 90/134頁
文件大?。?/td> 587K
代理商： ISP1161ABD
Philips Semiconductors
ISP1161A
Full-speed USB single-chip host and device controller
Product data
Rev. 03 — 23 December 2004
90 of 134
9397 750 13962
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
13. DC commands and registers
The functions and registers of ISP1161A’s DC are accessed via commands, which
consist of a command code followed by optional data bytes (read or write action). An
overview of the available commands and registers is given in
Table 75
.
A complete access consists of two phases:
1.
Command phase
: when address bit A0 = 1, the DC interprets the data on the
lower byte of the bus (bits D7 to D0) as a command code. Commands without a
data phase are executed immediately.
2.
Data phase (optional)
: when address bit A0 = 0, the DC transfers the data on
the bus to or from a register or endpoint FIFO. Multi-byte registers are accessed
least significant byte/word first.
As the ISP1161A DC’s data bus is 16 bits wide:
The upper byte (bits D15 to D8) in command phase, or the undefined byte in data
phase and is ignored.
The access of registers is word-aligned: byte access is not allowed.
If the packet length is odd, the upper byte of the last word in an IN endpoint buffer
is
not
transmitted to the host. When reading from an OUT endpoint buffer, the
upper byte of the last word must be ignored by the firmware. The packet length is
stored in the first 2 bytes of the endpoint buffer.
Table 75:
Name
Initialization commands
Write Control OUT Configuration
DC command and register summary
Destination
Code (Hex)
Transaction
[1]
DcEndpointConfiguration register
endpoint 0 OUT
DcEndpointConfiguration register
endpoint 0 IN
DcEndpointConfiguration register
endpoint 1 to 14
DcEndpointConfiguration register
endpoint 0 OUT
DcEndpointConfiguration register
endpoint 0 IN
DcEndpointConfiguration register
endpoint 1 to 14
DcAddress register
DcMode register
20
write 1 word
Write Control IN Configuration
21
write 1 word
Write Endpoint n Configuration
(n = 1 to 14)
Read Control OUT Configuration
22 to 2F
write 1 word
30
read 1 word
Read Control IN Configuration
31
read 1 word
Read Endpoint n Configuration
(n = 1 to 14)
Write/Read Device Address
Write/Read DcMode register
Write/Read Hardware Configuration DcHardwareConfiguration register
Write/Read DcInterruptEnable
register
Write/Read DMA Configuration
Write/Read DMA Counter
Reset Device
32 to 3F
read 1 word
B6/B7
B8/B9
BA/BB
C2/C3
write/read 1 word
write/read 1 word
write/read 1 word
write/read 2 words
DcInterruptEnable register
DcDMAConfiguration register
DcDMACounter register
resets all registers
F0/F1
F2/F3
F6
write/read 1 word
write/read 1 word
-
相關PDF資料
PDF描述
ISP1161ABM Full-speed Universal Serial Bus single-chip host and device controller
ISP1161 Full-speed Universal Serial Bus single-chip host and device controller
ISP1161A1 Universal Serial Bus single-chip host and device controller
ISP1161A1BD Universal Serial Bus single-chip host and device controller
ISP1161A1BM Universal Serial Bus single-chip host and device controller
相關代理商/技術參數
參數描述
ISP1161ABD,118 功能描述:USB 接口集成電路 DO NOT USE ORDER ISP1161A1BD RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161ABD,151 功能描述:USB 接口集成電路 DO NOT USE ORDER ISP1161A1BD RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161ABD,157 功能描述:USB 接口集成電路 DO NOT USE ORDER ISP1161A1BD RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1161ABD-S 功能描述:IC USB HOST CTRL FULL-SPD 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
ISP1161ABD-T 功能描述:IC USB HOST CTRL FULL-SPD 64LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN（6x6） 包裝:* 其它名稱:Q6396337A
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*