參數資料
型號: ISP1583BS,551
廠商: ST-ERICSSON
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQCC64
封裝: 9 X 9 MM, 0.85 MM HEIGHT, LEAD FREE, PLASTIC, MO-220, SOT-804-1, HVQFN-64
文件頁數: 38/100頁
文件大小: 508K
代理商: ISP1583BS,551
ISP1583_7
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 07 — 22 September 2008
41 of 99
NXP Semiconductors
ISP1583
Hi-Speed USB peripheral controller
buffer is automatically validated. The data packet will then be sent on the next IN token.
When it is necessary to validate the endpoint whose byte count is less than
MaxPacketSize, it can be done using the Control Function register (bit VENDP) or the
Buffer Length register.
Remark: The buffer can automatically be validated by using the Buffer Length register
Host-to-peripheral (OUT endpoint): After each read action, an internal counter is auto
decremented (by two for a 16-bit access, by one for an 8-bit access) to the next location in
the RX FIFO. When all bytes are read, buffer contents are automatically cleared. A new
data packet can then be received on the next OUT token. Buffer contents can also be
cleared using the Control Function register (bit CLBUF), when it is necessary to forcefully
clear contents.
Remark: The delay time from the Write Endpoint Index register to the Read Data Port
register must be at least 190 ns.
Remark: The delay time from the Write Endpoint Index register to the Write Data Port
register must be at least 100 ns.
9.3.4 Buffer Length register (address: 1Ch)
This register determines the current packet size (DATACOUNT) of the indexed endpoint
FIFO. The bit allocation is given in Table 41.
The Buffer Length register is automatically loaded with the FIFO size, when the Endpoint
MaxPacketSize register is written (see Table 45). A smaller value can be written when
required. After a bus reset, the Buffer Length register is made zero.
IN endpoint: When data transfer is performed in multiples of MaxPacketSize, the Buffer
Length register is not signicant. This register is useful only when transferring data that is
not a multiple of MaxPacketSize. The following two examples demonstrate the
signicance of the Buffer Length register.
Table 39.
Data Port register: bit allocation
Bit
15
14
13
12
11
10
9
8
Symbol
DATAPORT[15:8]
Reset
00000000
Bus reset
00000000
Access
R/W
Bit
7
6
5
4
3
2
1
0
Symbol
DATAPORT[7:0]
Reset
00000000
Bus reset
00000000
Access
R/W
Table 40.
Data Port register: bit description
Bit
Symbol
Description
15 to 8
DATAPORT[15:8] data (upper byte)
7 to 0
DATAPORT[7:0]
data (lower byte)
相關PDF資料
PDF描述
ISP1583ET2 UNIVERSAL SERIAL BUS CONTROLLER, PBGA64
ISP1761ET,518 UNIVERSAL SERIAL BUS CONTROLLER, PBGA128
ISP1761BE,518 UNIVERSAL SERIAL BUS CONTROLLER, PQFP128
ISP1761BE,551 UNIVERSAL SERIAL BUS CONTROLLER, PQFP128
ISP1761BE,518 UNIVERSAL SERIAL BUS CONTROLLER, PQFP128
相關代理商/技術參數
參數描述
ISP1583BSGA 功能描述:IC USB CTRL HI-SPEED 64HVQFN RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1583BS-S 功能描述:USB 接口集成電路 HI-SPEED USB2 DEVICE RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1583BS-T 功能描述:USB 接口集成電路 USB PERIPH CNTRLR RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1583BSUM 功能描述:IC USB PERIPH CONTROLLER 64HVQFN RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
ISP1583ET 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Hi-Speed USB peripheral controller