- 您現在的位置：買賣IC網 > PDF目錄353842 > JANTX2N2221A TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | TO-18 PDF資料下載
參數資料
| 型號： | JANTX2N2221A |
| 英文描述： | TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | TO-18 |
| 中文描述： | 晶體管|晶體管|叩| 40V的五（巴西）總裁| 800mA的一（c）|到18 |
| 文件頁數： | 23/23頁 |
| 文件大小： | 135K |
| 代理商： | JANTX2N2221A |
MIL-PRF-19500/545D
9
3. REQUIREMENTS
3.1. General.
The requirements for acquiring the product described herein shall consist of this document and
MIL-PRF-19500.
3.2.
Qualification.
Devices furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturer’s list (QML)
before contract award (see 4.2 and 6.3).
3.3. Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as
specified in MIL-PRF-19500.
3.4. Interface and physical dimensions. The interface and physical dimensions shall be as specified in
MIL-PRF-19500 and figure 1 (TO-205), figures 2, 3, and 4 for JANHC and JANKC, figure 5 for U3 herein.
3.4.1. Current density. Current density of internal conductors shall be as specified in MIL-PRF-19500.
3.4.2. Lead finish. Lead finish shall be solderable as defined in MIL-PRF-19500, MIL-STD-750, and herein.
Where a choice of lead finish is desired, it shall be specified in the acquisition document (see 6.2).
3.5. Electrical performance characteristics. Unless otherwise specified herein, the electrical performance
characteristics are as specified in 1.3, 1.4, and table I herein.
3.6. Electrical test requirements. The electrical test requirements shall be the subgroups specified in table I herein.
3.7. Marking. Marking shall be in accordance with MIL-PRF-19500.
3.8. Workmanship. Semiconductor devices shall be processed in such a manner as to be uniform in quality and
shall be free from other defects that will affect life, serviceability, or appearance.
4. VERIFICATION
4.1. Classification of inspections. The inspection requirements specified herein are classified as follows:
a. Qualification inspection (see 4.2).
b. Screening (see 4.3).
c. Conformance inspection (see 4.4).
4.2. Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500 and as
specified herein.
4.2.1. JANHC and JANKC qualification. JANHC and JANKC qualification inspection shall be in accordance with
MIL-PRF-19500.
相關PDF資料 |
PDF描述 |
|---|---|
| JANTX2N2221AL | TRANSISTOR | BJT | NPN | 50V V(BR)CEO | 800MA I(C) | TO-206AA |
| JANTX2N2221AUA | TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | SMT |
| JANTX2N2221AUB | TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | CHIP |
| JANTX2N2222AUA | TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | SMT |
| JANTX2N2222AUB | TRANSISTOR | BJT | NPN | 40V V(BR)CEO | 800MA I(C) | SMT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| JANTX2N2221AL | 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 50V 0.8A 3PIN TO-18 - Bulk |
| JANTX2N2221AUA | 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 50V 0.8A 4PIN UA - Trays |
| JANTX2N2221AUB | 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 50V 0.8A 3-Pin UB 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 50V 0.8A 3PIN UB - Waffle Pack |
| JANTX2N2222 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| JANTX2N2222A | 功能描述:兩極晶體管 - BJT RoHS:否 制造商:STMicroelectronics 配置: 晶體管極性:PNP 集電極—基極電壓 VCBO: 集電極—發射極最大電壓 VCEO:- 40 V 發射極 - 基極電壓 VEBO:- 6 V 集電極—射極飽和電壓: 最大直流電集電極電流: 增益帶寬產品fT: 直流集電極/Base Gain hfe Min:100 A 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:PowerFLAT 2 x 2 |
發布緊急采購，3分鐘左右您將得到回復。