- 您現在的位置：買賣IC網 > PDF目錄353812 > JANTXV2N7373 TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-254AA PDF資料下載
參數資料
| 型號： | JANTXV2N7373 |
| 英文描述： | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-254AA |
| 中文描述： | 晶體管|晶體管|叩| 80V的五（巴西）總裁| 5A條一（c）|至254AA |
| 文件頁數： | 3/19頁 |
| 文件大小： | 103K |
| 代理商： | JANTXV2N7373 |
MIL-PRF-19500/512E
11
4.4.2.2 Group B inspection, (JAN, JANTX and JANTXV). Separate samples may be used for each step. In the
event of a group B failure, the manufacturer may pull a new sample at double size from either the failed assembly lot
or from another assembly lot from the same wafer lot. If the new “assembly lot” option is exercised, the failed
assembly lot shall be scrapped.
Step
Method
Condition
1
1039
Steady-state life: Test condition B, 340 hours, VCB = 10 - 20 V dc, power shall
be applied to the device to achieve TJ = +150°C minimum, and a minimum of PD
= 75 percent of maximum rated PT as defined in 1.3 herein. n = 45, c = 0.
2
1039
The steady-state life test of step 1 shall be extended to 1,000 hours for each die
design. Samples shall be selected from a wafer lot every twelve months of wafer
production. Group B, step 2 shall not be required more than once for any single
wafer lot. n = 45, c = 0.
3
1032
High- temperature life (non-operating), T
A = +200°C, t = 340 hours, n = 22,
c = 0.
4.4.2.3 Group B sample selection. Samples selected from group B inspection shall meet all of the following
requirements:
a.
For JAN, JANTX, and JANTXV samples shall be selected randomly from a minimum of three wafers (or
from each wafer in the lot) from each wafer lot. For JANS, samples shall be selected from each inspection
lot. See MIL-PRF-19500.
b.
Must be chosen from an inspection lot that has been submitted to and passed group A, subgroup 2,
conformance inspection. When the final lead finish is solder or any plating prone to oxidation at high
temperature, the samples for life test (subgroups B4 and B5 for JANS, and group B for JAN, JANTX, and
JANTXV) may be pulled prior to the application of final lead finish.
4.4.3 Group C inspection. Group C inspection shall be conducted in accordance with the tests and conditions
specified for subgroup testing in table VII of MIL-PRF-19500, and in 4.4.3.1 (JANS) and 4.4.3.2 (JAN, JANTX, and
JANTXV) herein for group C testing. Electrical measurements (end-points) and delta requirements shall be in
accordance with group A, subgroup 2 and 4.5.2 herein; delta requirements only apply to subgroup C6.
4.4.3.1 Group C inspection, table VII (JANS) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E; (method 2036 not applicable for UA and UB devices).
C6
1026
1,000 hours at VCB = 10 V dc; power shall be applied to achieve TJ = +150°C
minimum and a minimum of PD = 75 percent of maximum rated PT as defined in
1.3.
4.4.3.2 Group C inspection, table VII (JAN, JANTX, and JANTXV) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E; not applicable for UA and UB devices.
C6
Not applicable.
相關PDF資料 |
PDF描述 |
|---|---|
| JANTXV2N918 | TRANSISTOR | BJT | NPN | 15V V(BR)CEO | 50MA I(C) | TO-72 |
| JCLFCMEN-15.000MHZ | Voltage-Controlled Oscillator |
| JCLFCMEN-155.520MHZ | Voltage-Controlled Oscillator |
| JCLFCMEN-170.000MHZ | Voltage-Controlled Oscillator |
| JCLFCMEN-77.760MHZ | Voltage-Controlled Oscillator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| JANTXV2N918 | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR - Bulk |
| JANTXV2N918UB | 制造商:Semicoa Semiconductors 功能描述:Trans GP BJT NPN 15V 0.05A 3-Pin UB 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Waffle Pack |
| JANTXV2N930 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 45V 0.03A 3-Pin TO-18 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Bulk 制造商:Microsemi Corporation 功能描述:NPN LOW POWER SILICON TRANSISTOR |
| JANTXV2N930UB | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Waffle Pack |
| JANTXV4N22 | 功能描述:Optoisolator Transistor with Base Output 1000VDC 1 Channel TO-78-6 制造商:tt electronics/optek technology 系列:- 包裝:散裝 零件狀態:有效 通道數:1 電壓 - 隔離:1000VDC 電流傳輸比（最小值）:25% @ 10mA 電流傳輸比（最大值）:- 打開 / 關閉時間（典型值）:- 上升/下降時間（典型值）:20μs，20μs（最大） 輸入類型:DC 輸出類型:有基極的晶體管 電壓 - 輸出（最大值）:40V 電流 - 輸出/通道:50mA 電壓 - 正向（Vf）（典型值）:1.5V（最大） 電流 - DC 正向（If）:40mA Vce 飽和值（最大值）:300mV 工作溫度:-55°C ~ 125°C 安裝類型:通孔 封裝/外殼:TO-78-6 金屬罐 供應商器件封裝:TO-78-6 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。