參數資料
型號: LFEC33E-5FN672C
廠商: Lattice Semiconductor Corporation
文件頁數: 83/163頁
文件大?。?/td> 0K
描述: IC FPGA 32.8KLUTS 672FPBGA
標準包裝: 40
系列: EC
邏輯元件/單元數: 32800
RAM 位總計: 434176
輸入/輸出數: 496
電源電壓: 1.14 V ~ 1.26 V
安裝類型: 表面貼裝
工作溫度: 0°C ~ 85°C
封裝/外殼: 672-BBGA
供應商設備封裝: 672-FPBGA(27x27)
2-23
Architecture
LatticeECP/EC Family Data Sheet
Input Register Block
The input register block contains delay elements and registers that can be used to condition signals before they are
passed to the device core. Figure 2-26 shows the diagram of the input register block.
Input signals are fed from the sysI/O buffer to the input register block (as signal DI). If desired the input signal can
bypass the register and delay elements and be used directly as a combinatorial signal (INDD), a clock (INCK) and
in selected blocks the input to the DQS delay block. If one of the bypass options is not chosen, the signal first
passes through an optional delay block. This delay, if selected, reduces input-register hold-time requirement when
using a global clock.
The input block allows two modes of operation. In the single data rate (SDR) the data is registered, by one of the
registers in the single data rate sync register block, with the system clock. In the DDR Mode two registers are used
to sample the data on the positive and negative edges of the DQS signal creating two data streams, D0 and D2.
These two data streams are synchronized with the system clock before entering the core. Further discussion on
this topic is in the DDR Memory section of this data sheet.
Figure 2-27 shows the input register waveforms for DDR operation and Figure 2-28 shows the design tool primi-
tives. The SDR/SYNC registers have reset and clock enable available.
The signal DDRCLKPOL controls the polarity of the clock used in the synchronization registers. It ensures ade-
quate timing when data is transferred from the DQS to system clock domain. For further discussion on this topic,
see the DDR Memory section of this data sheet.
Figure 2-26. Input Register Diagram
D
Q
D
Q
D
Q
D-Type
Fixed Delay
To Routing
DI
(From sysIO
Buffer)
DQS Delayed
(From DQS
Bus)
CLK0
(From Routing)
DDRCLKPOL
(From DDR
Polarity Control Bus)
INCK
INDD
Delay Block
DDR Registers
D-Type
D
Q
D
Q
D-Type
/LATCH
D-Type
IPOS0
IPOS1
SDR & Sync
Registers
D0
D2
D1
相關PDF資料
PDF描述
LFX200B-04F256C IC FPGA 200K GATES 256-BGA
LFX200B-04FN256C IC FPGA 210KGATES 256FPBGA
RF803E IC ENCODER 3 DGTL I/O 8-PDIP
DS9100-B+ CONTACT TOUCH AND HOLD
LFEC33E-4FN484I IC FPGA 32.8KLUTS 484FPBGA
相關代理商/技術參數
參數描述
LFEC33E-5FN672I 制造商:LATTICE 制造商全稱:Lattice Semiconductor 功能描述:LatticeECP/EC Family Data Sheet
LFEC33E-5Q208C 制造商:LATTICE 制造商全稱:Lattice Semiconductor 功能描述:LatticeECP/EC Family Data Sheet
LFEC33E-5Q208I 制造商:LATTICE 制造商全稱:Lattice Semiconductor 功能描述:LatticeECP/EC Family Data Sheet
LFEC33E-5QN208C 制造商:LATTICE 制造商全稱:Lattice Semiconductor 功能描述:LatticeECP/EC Family Data Sheet
LFEC33E-5QN208I 制造商:LATTICE 制造商全稱:Lattice Semiconductor 功能描述:LatticeECP/EC Family Data Sheet